J810 · Front Passenger's Power Seat Control Module
- Name
- Front Passenger's Power Seat Control Module
- Type
- control module / relay
- Models
- B7 only
- Diagrams
- 2
Location
In or under the front passenger's seatinferred from name
Other location statements (2)
- Wired into the instrument panel wiring harnessinferred from wiring
- Its wires run through T10o (Connector station - LF seat wiring)inferred from wiring
Area: Seats
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
T12q · 12-Pin Connector, black likely Power
Pin positions schematic: check the numbers moulded on the housing
12 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: black sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.
Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.
Tap a pin for what it does and where its wire goes.
T12q pin 1
T12q pin 2
- Colour
gn/sw0.5 mm²- Function
- not stated
- Far ends
J795/3- Wire
- Wire between J720 and J795 (+1)
- Diagrams
- 116
T12q pin 3
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T12q pin 4
- Colour
gr/sw0.5 mm²- Function
- not stated
- Far ends
J796/8- Wire
- Wire between J720 and J796 (+1)
- Diagrams
- 116
T12q pin 5
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T12q pin 6
- Colour
ge/sw0.5 mm²- Function
- not stated
- Far ends
J797/3- Wire
- Wire between J720 and J797 (+1)
- Diagrams
- 116
T12q pin 7
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T12q pin 8
- Colour
sw/ro0.5 mm²- Function
- not stated
- Far ends
J798/8- Wire
- Wire between J720 and J798 (+1)
- Diagrams
- 116
T12q pin 9
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T12q pin 10
- Colour
or0.5 mm²- Function
- not stated
- Far ends
V152/2- Wire
- Wire between J810 and V152
- Diagrams
- 116
T12q pin 11
- Colour
br1.5 mm²- Function
- Ground (terminal 31) at 77 (On left lower B-pillar)stated
- Far ends
- none found
- Wire
- Ground (terminal 31) at 77 (On left lower B-pillar)
- Diagrams
- 116
T12q pin 12
- Colour
ro/ws2.5 mm²- Function
- Battery positive, permanent (terminal 30)stated
- Far ends
J720/12,S45/2viaB118- Wire
- Battery positive, permanent (terminal 30)
- Diagrams
- 116
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | bl/ge 0.5 mm² | not stated | J795/1, J796/6, J797/1, J798/6via M11 | B7 only | 730 |
2 | gn/sw 0.5 mm² | not stated | J795/3 | B7 only | 730 |
4 | gr/sw 0.5 mm² | not stated | J796/8 | B7 only | 730 |
6 | ge/sw 0.5 mm² | not stated | J797/3 | B7 only | 730 |
8 | sw/ro 0.5 mm² | not stated | J798/8 | B7 only | 730 |
10 | or 0.5 mm² | not stated | V152/2 | B7 only | 731 |
11 | br 1.5 mm² | Ground (terminal 31) at 77 (On left lower B-pillar)stated | B7 only | 728 | |
12 | ro/ws 2.5 mm² | Battery positive, permanent (terminal 30)stated | J720/12, S45/2via B118 | B7 only | 728 |
T32j · 32-Pin Connector, blue likely Switches
Pin positions schematic: check the numbers moulded on the housing
32 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: blue sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.
Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.
Tap a pin for what it does and where its wire goes.
T32j pin 1
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 2
- Colour
or/gn0.5 mm²- Function
- F224 Driver's Lumbar Support Pressure Switch pin 2 — line to J810 T32j/2 (switch line, not a CAN wire)stated
- Far ends
F224/2- Wire
- F224 Driver's Lumbar Support Pressure Switch pin 2 — line to J810 T32…
- Diagrams
- 116
T32j pin 3
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 4
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 5
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 6
- Colour
gn/ro0.5 mm²- Function
- not stated
- Far ends
E176/1- Wire
- Wire between E176 and J810
- Diagrams
- 116
T32j pin 7
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 8
T32j pin 9
T32j pin 10
T32j pin 11
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 12
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 13
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 14
T32j pin 15
- Colour
bl/ro0.5 mm²- Function
- not stated
- Far ends
E176/2- Wire
- Wire between E176 and J810
- Diagrams
- 116
T32j pin 16
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 17
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 18
- Colour
br/ws0.5 mm²gr- Function
- not stated
- Far ends
E587/2- Wire
- Wire between E587 and J810 (+1)
- Diagrams
- 116
T32j pin 19
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 20
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 21
- Colour
br/sw0.5 mm²gr- Function
- not stated
- Far ends
E589/2- Wire
- Wire between E589 and J810 (+1)
- Diagrams
- 116
T32j pin 22
- Colour
ge/br0.5 mm²- Function
- not stated
- Far ends
E176/6- Wire
- Wire between E176 and J810
- Diagrams
- 116
T32j pin 23
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 24
- Colour
ws/ro0.5 mm²- Function
- not stated
- Far ends
E176/5- Wire
- Wire between E176 and J810
- Diagrams
- 116
T32j pin 25
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 26
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 27
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 28
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 29
- Colour
gn/bl0.35 mm²gn/ge- Function
- L-line (diagnosis), to diagnostic connection T16 pin 15stated
- Far ends
- none foundvia
A159 - Wire
- L-line (diagnosis), to diagnostic connection T16 pin 15
- Diagrams
- 116
T32j pin 30
- Colour
or/ge0.5 mm²- Function
- not stated
- Far ends
F224/1- Wire
- Wire between F224 and J810
- Diagrams
- 116
T32j pin 31
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T32j pin 32
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
2 | or/gn 0.5 mm² | F224 Driver's Lumbar Support Pressure Switch pin 2 — line to J810 T32j/2 (switch line, not a CAN wire)stated | F224/2 | B7 only | 731 |
6 | gn/ro 0.5 mm² | not stated | E176/1 | B7 only | 730 |
8 | ro 0.5 mm² | not stated | E176/4, E587/1, E589/1, J810/14via M10 | B7 only | 730 |
9 | li/sw 0.35 mm²or/gn | Comfort CAN Highstated | J285/17, J136/9, J255/C/11, J345/I/3, J364/I/8, J386/4, J387/4, J388/4, J389/4, J393/13, J446/14 and 3 morevia A146 | B7 only | 713 729 |
10 | gn 0.35 mm²or/br | Comfort CAN Lowstated | J285/18, J136/10, J255/C/12, J345/I/4, J364/I/7, J386/5, J387/5, J388/5, J389/5, J393/12, J446/7 and 3 morevia A147 | B7 only | 713 729 |
14 | ro 0.5 mm² | not stated | E176/4, E587/1, E589/1, J810/8via M10 | B7 only | 730 |
15 | bl/ro 0.5 mm² | not stated | E176/2 | B7 only | 730 |
18 | br/ws 0.5 mm²gr | not stated | E587/2 | B7 only | 730 |
21 | br/sw 0.5 mm²gr | not stated | E589/2 | B7 only | 730 |
22 | ge/br 0.5 mm² | not stated | E176/6 | B7 only | 730 |
24 | ws/ro 0.5 mm² | not stated | E176/5 | B7 only | 730 |
29 | gn/bl 0.35 mm²gn/ge | L-line (diagnosis), to diagnostic connection T16 pin 15stated | via A159 | B7 only | 728 |
30 | or/ge 0.5 mm² | not stated | F224/1 | B7 only | 731 |
Diagrams
- 111 · Can-Bus wiring B7 · From 2006 m. y.
- 116 · Power seats with lumbar support and electrically seat heating B7 · From 2006 m.y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.