Starter lock relay
Check first
Generated from the wiring data for this system’s 2 diagrams (listed under In the wiring data): the fuses, the ground points and the supply and ground pins of its control modules. These lists are not checked by hand, whatever the article's own status: each line says how it was worked out. Check anything important against the manual sheet before you cut or splice.
Fuses
The data has no fuse for this system.
Ground points
| Point | Where |
|---|---|
238 | Splice inside the wiring harnesssheet legend |
Supply and ground pins
The data labels no supply or ground pin of this system’s control modules.
The factory wiring manual draws this system in 2 diagrams: “Starter, Clutch Pedal Switch Locking Relay” (B6: 42) and “Starter Lock/Clutch Pedal Switch Relay” (B7: 85). Nothing has been written about it here yet; the lists on this page are generated from those diagrams.
In the wiring data
Everything drawn in this system’s diagrams of the factory manual, generated when the site is built. A part drawn in several systems is listed on each of them. Locations say how they were worked out; the component pages have every pin.
Control modules
| Code | Name | Location | Also on |
|---|---|---|---|
J434 | Locking relay for starter (clutch pedal switch) | Relay carrier E-Box, engine codes BHF from 2006 MY, position 1.2 — In electronics box (E-box), plenum chambermanual text | 1.8 T engine (AMB), 3.0 V6 engine (AVK, BGN), 4.2 V8 engine, S4 (BHF, BBK) |
Other components
Ignition switch (1)
DIgnition/Starter Switch
Switch (1)
F194Clutch Pedal Starter Interlock Switch
Splices
D97Starter control (terminal 50)
Diagrams
- 42 Starter, Clutch Pedal Switch Locking Relay (B6 only)
- 85 Starter Lock/Clutch Pedal Switch Relay (B7 only)