Wire between E176 and E587 (+5)
Net n16f7e2d4 · one diagram
- Function
- Shared line: E176, J810, E587, E589endpoints onlyBasis: 4 parts on this net, no function stated
- Wire
rogr- Models
- B7 only
- Drawn in
- 1 diagram, 5 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
2 guessed components
What is on this wire
Parts (4)
Splices (1)
M10Connection 1 (in driver's seat adjustment wiring harness)
Inline connectors (2)
Where these parts are
| Part | Location |
|---|---|
E176 | In or under the driver's seatinferred from name |
E587 | In or under the driver's seatinferred from name |
E589 | In or under the driver's seatinferred from name |
J810 | In or under the front passenger's seatinferred from name |
M10 | Splice inside the driver's seat adjustment wiring harnesssheet legend |
T2ai | Behind panel on seat in front areasheet legend |
T2aj | Behind panel on seat in front areasheet legend |
Drawing
Wires are ro (red) unless a colour is written on them. 7 parts and points, 6 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
116 · Power seats with lumbar support and electrically seat heating B7 · 5 stretches
Page 730manual · Driver's Seat Lumbar Support Adjustment Switch, Driver's Seat Bolster Inflation Adjustment Button, Driver's Backrest Bolster Inflation Adjustment Button
| Track | Wire | From | To | Notes |
|---|---|---|---|---|
| 30 | ro 0.5 mm² | splice M10 | J810 T32j/8 | |
| 31 | ro 0.5 mm² | splice M10 | J810 T32j/14 | |
| 33 | ro → gr 0.5 mm² | splice M10 | E587 1guess | via T2ai/1 |
| 36 | ro → gr 0.5 mm² | splice M10 | E589 1guess | via T2aj/1 |
| 38 | ro 0.5 mm² | splice M10 | E176 4 |
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.