V152 · Driver's Lumbar Support Pump
- Name
- Driver's Lumbar Support Pump
- Type
- motor
- Models
- B7 only
- Diagrams
- 1
Location
In or under the driver's seatinferred from name
Area: Seats
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Motors/actuators & Module links
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | br 0.5 mm² | Ground (terminal 31)stated | N209/3, V378/3 | B7 only | 731 |
2 | no colour | not stated | J810/10 | B7 only | 731 |
Diagrams
- 116 · Power seats with lumbar support and electrically seat heating B7 · From 2006 m.y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.