Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

About this wiki

What the wiki covers, where its information comes from, and how far to trust each kind of page.

This wiki collects technical information about the Audi A4 B6 and B7 (platform 8E, built November 2000 to 2008), sedan and Avant, including the S4 and RS4. The cabriolet (8H) is not covered.

Source Used for
Audi A4 Wiring Diagrams and Component Locations, edition 12.2005 (factory manual, 1,336 pages) The wiring database: every component, pin, wire, splice, ground point, fuse and location. Extracted from the PDF by the tools in the repository’s tools/ folder.
Audi Self-Study Programmes 238, 269, 286 and 254 The CAN bus and other data-bus articles, and the platform articles on the B6 at launch.
The site owner’s own notes and pinout sheet The head-unit guide, sound-system, instrument-cluster and retrofit articles.
Forum threads and enthusiast sites Some retrofit guides. These are summarised in our own words and link back to the original.
Web research Model codes, B6/B7 differences, VCDS addresses and the fact-checks noted on each article.

Every article lists its sources at the bottom and carries a status badge:

  • Verified: from the factory manual or Audi training material.
  • Community write-up: from an owner’s notes or a forum thread, not checked against factory documentation.
  • Researched: compiled from public sources and not tried on a car.
  • Work in progress / Stub: incomplete.

The pages under Wiring database (components, diagrams, splices and ground points, connectors, fuses, locations) are generated from the extracted data each time the site is built. They say how each statement was derived:

Badge Meaning
manual text stated in the manual’s Component Locations sections
sheet legend stated in the legend of a wiring sheet
manual figure shown in a figure of the manual, without a text location
inferred from wiring worked out from the harness or connector station the wires use
inferred from name worked out from the component name (left/right, door, seat …)
outside reference not in the manual; general B6/B7 knowledge
stated / derived / endpoints only for wire functions: named by the manual, worked out from terminal markings, fuses or colour codes, or only described by what the wire connects

The extraction was checked by hand on samples (see docs/history.md in the repository), but it is still automated. Before cutting or splicing a wire, check the PDF sheet; every pin row links to it.

The interactive tools the database was first built for, once a separate page, are part of the wiki: the net pages trace a wire across sheets and diagrams, My car at the top of every page filters by model, engine, gearbox and body, the diagram finder lists the sheets that show a part, and the 3D car shows every part and wire in a rough 3D model of the car. Component pages link to them (“Show in the 3D car”).

  • B6: November 2000 (sedan) / November 2001 (Avant) to November 2004.
  • B7: from November 2004.
  • Left and right are as seen from the driver’s seat, and the manual draws a left-hand-drive car, so “left” is the driver’s side on most cars.