J345 · Control Module for towing sensor
- Name
- Control Module for towing sensor
- Type
- control module / relay
- Models
- B6 and B7
- Diagrams
- 2
Location
Wired into the instrument panel wiring harnessinferred from wiring · 4 of 4 named splices on its wires
Other location statements (1)
- Shown in the manual's location figures: Component locations control module overviewmanual figure p. 1121
Area: Instrument panel
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely CAN bus
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
I/3 | or/gn 0.35 mm² | Comfort CAN Highstated | J136/9, J285/17, J446/14, J519/13, J527/9, E87/C/11, J364/8, J393, J393/5/13, J255/C/11, J364/I/8, J386/4 and 6 morevia A146 | B6 and B7 | 264 713 |
I/4 | or/br 0.35 mm² | Comfort CAN Lowstated | J136/10, J285/18, J446/7, J519/12, J527/8, E87/C/12, J364/7, J393, J393/5/12, J255/C/12, J364/I/7, J386/5 and 6 morevia A147 | B6 and B7 | 264 713 |
Diagrams
- 30 · CAN-Bus wiring B6 · From 2004 m. y.
- 111 · Can-Bus wiring B7 · From 2006 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.