Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J388 · Door control module, rear, left

Name
Door control module, rear, left
Type
control module / relay
Models
B6 and B7
Diagrams
6

Location

Integrated in electric window motormanual text Manual pages 1168

Other location statements (4)
  • Integrated in Left Rear Window Regulator Motor -V26-manual text p. 1319, p. 1321
  • In the left rear doorinferred from name
  • Wired into the instrument panel wiring harnessinferred from wiring
  • Its wires run through T20b (Door B-pillar, left)inferred from wiring

Area: Doors

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

T10g · 10-Pin Connector, black, on door control module, rear, left likely Power & CAN bus

T10g · 10-Pin Connector, black, on door control module, rear, left · diagrams 6, 35, 67, 110, 111, 318

Pin positions schematic: check the numbers moulded on the housing

10 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: black sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T10g pin 1

Colour
br 2.5 mm²
Function
Ground (terminal 31) at 77 (On left lower B-pillar)stated
Far ends
none found
via 77
Wire
Ground (terminal 31) at 77 (On left lower B-pillar)
Ground (terminal 31) at 77 (On left lower B-pillar)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10g pin 2

Colour
ro/ge 0.5 mm²
Function
Fused supply from S223 (15 A)derived
Far ends
J389/2, S223/23a
Wire
Fused supply from S223 (15 A)
Fused supply from S223 (15 A)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10g pin 3

Colour
ro/gr 0.5 mm²
Function
Comfortstated
Far ends
J386/3, J387/3, J389/3, J393/10
via B207
Wire
Comfort
Comfort
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10g pin 4

Colour
or/gn 0.35 mm²
Function
Comfort CAN Highstated
Far ends
J386/4, J387/4, J389/4, J393/13, J136/9, J255/C/11, J285/17, J345/I/3, J364/I/8, J446/14, J503/1 and 3 more
via A146
Wire
Comfort CAN High
Diagrams
6, 35, 67, 110, 111, 318

Row in the pin table

T10g pin 5

Colour
or/br 0.35 mm²
Function
Comfort CAN Lowstated
Far ends
J386/5, J387/5, J389/5, J393/12, J136/10, J255/C/12, J285/18, J345/I/4, J364/I/7, J446/7, J503/2 and 3 more
via A147
Wire
Comfort CAN Low
Diagrams
6, 35, 67, 110, 111, 318

Row in the pin table

T10g pin 6

Colour
ro/bl 2.5 mm²
ro/sw
Function
not stated
Far ends
J389/6, S280/2
Wire
Wire between J388 and J389 (+3)
Wire between J388 and J389 (+3)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10g pin 7

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T10g pin 8

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T10g pin 9

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T10g pin 10

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

PinWireFunctionConnects toModelsSheets
1
br 2.5 mm²
Ground (terminal 31) at 77 (On left lower B-pillar)stated
via 77
B6 and B781 323 495 705 +1
2
ro/ge 0.5 mm²
Fused supply from S223 (15 A)derived
J389/2, S223/23aB6 and B781 323 495 705 +1
3
ro/gr 0.5 mm²
Comfortstated
J386/3, J387/3, J389/3, J393/10
via B207
B6 and B781 323 495 705 +1
4
or/gn 0.35 mm²
Comfort CAN Highstated
J386/4, J387/4, J389/4, J393/13, J136/9, J255/C/11, J285/17, J345/I/3, J364/I/8, J446/14, J503/1 and 3 more
via A146
B6 and B781 323 495 705 +2
5
or/br 0.35 mm²
Comfort CAN Lowstated
J386/5, J387/5, J389/5, J393/12, J136/10, J255/C/12, J285/18, J345/I/4, J364/I/7, J446/7, J503/2 and 3 more
via A147
B6 and B781 323 495 705 +2
6
ro/bl 2.5 mm²
ro/sw
not statedJ389/6, S280/2B6 and B781 323 495 705 +1

T12b · 12-Pin Connector, black, on door control module, rear, left likely Motors/actuators & Switches

T12b · 12-Pin Connector, black, on door control module, rear, left · diagrams 6, 35, 67, 110, 318

Pin positions schematic: check the numbers moulded on the housing

12 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: black sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T12b pin 1

Colour
bl 0.35 mm²
Function
not stated
Far ends
F132/verr., F132/3
Wire
Wire between F132 and J388
Wire between F132 and J388
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12b pin 2

Colour
li/ge 0.35 mm²
Function
not stated
Far ends
F245/safe, F245/5
Wire
Wire between F245 and J388
Wire between F245 and J388
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12b pin 3

Colour
gr/li 0.35 mm²
Function
Door contact signal (TK)derived
Far ends
F10/TK, F10/4
Wire
Door contact signal (TK)
Door contact signal (TK)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12b pin 4

Colour
gr/gn 0.35 mm²
or
Function
not stated
Far ends
V115/V--, V115/1
Wire
Wire between J388 and V115
Wire between J388 and V115
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12b pin 5

Colour
br/bl 0.35 mm²
Function
not stated
Far ends
V115/V+, V115/2
Wire
Wire between J388 and V115
Wire between J388 and V115
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12b pin 6

Colour
gr/bl 0.35 mm²
Function
not stated
Far ends
V163/S+, V163/7
Wire
Wire between J388 and V163
Wire between J388 and V163
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12b pin 7

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12b pin 8

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12b pin 9

Colour
br 0.35 mm²
Function
Ground (terminal 31)derived
Far ends
F245/KL.31, F245/6
Wire
Ground (terminal 31)
Ground (terminal 31)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12b pin 10

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12b pin 11

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12b pin 12

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

PinWireFunctionConnects toModelsSheets
1
bl 0.35 mm²
not statedF132/verr., F132/3B6 and B782 324 496 706 +1
2
li/ge 0.35 mm²
not statedF245/safe, F245/5B6 and B782 324 496 706 +1
3
gr/li 0.35 mm²
Door contact signal (TK)derived
F10/TK, F10/4B6 and B782 324 496 706 +1
4
gr/gn 0.35 mm²
or
not statedV115/V--, V115/1B6 and B782 324 496 706 +1
5
br/bl 0.35 mm²
not statedV115/V+, V115/2B6 and B782 324 496 706 +1
6
gr/bl 0.35 mm²
not statedV163/S+, V163/7B6 and B782 324 496 706 +1
9
br 0.35 mm²
Ground (terminal 31)derived
F245/KL.31, F245/6B6 and B782 324 496 706 +1

T16d · 16-Pin Connector, brown, door control module, rear, left likely Lighting

T16d · 16-Pin Connector, brown, door control module, rear, left · diagrams 6, 35, 67, 110, 318

Pin positions schematic: check the numbers moulded on the housing

16 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: brown sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T16d pin 1

Colour
bl/br 0.35 mm²
Function
Dimmed switch illumination (terminal 58s)stated
Far ends
E52/1/58, L110/2
via R54
Wire
Dimmed switch illumination (terminal 58s)
Dimmed switch illumination (terminal 58s)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16d pin 2

Colour
br/ge 0.35 mm²
Function
not stated
Far ends
W33/2
Wire
Wire between J388 and W33
Wire between J388 and W33
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16d pin 3

Colour
br/li 0.35 mm²
Function
not stated
Far ends
W37/2
Wire
Wire between J388 and W37
Wire between J388 and W37
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16d pin 4

Colour
sw/gn 0.35 mm²
Function
not stated
Far ends
E52/3/HL, E52/2/HL
Wire
Wire between E52 and J388
Wire between E52 and J388
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16d pin 5

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 6

Colour
br 0.35 mm²
or
Function
Ground (terminal 31) at 77 (On left lower B-pillar)stated
Far ends
W33/1, W37/1, L110/1, E52/5/31, E52/2/31
via 207
Wire
Ground (terminal 31) at 77 (On left lower B-pillar)
Ground (terminal 31) at 77 (On left lower B-pillar)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16d pin 7

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 8

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 9

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 10

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 11

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 12

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 13

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 14

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 15

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16d pin 16

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

PinWireFunctionConnects toModelsSheets
1
bl/br 0.35 mm²
Dimmed switch illumination (terminal 58s)stated
E52/1/58, L110/2
via R54
B6 and B781 323 495 705 +1
2
br/ge 0.35 mm²
not statedW33/2B6 and B781 323 495 705 +1
3
br/li 0.35 mm²
not statedW37/2B6 and B781 323 495 705 +1
4
sw/gn 0.35 mm²
not statedE52/3/HL, E52/2/HLB6 and B781 323 495 705 +1
6
br 0.35 mm²
or
Ground (terminal 31) at 77 (On left lower B-pillar)stated
W33/1, W37/1, L110/1, E52/5/31, E52/2/31
via 207
B6 and B781 323 495 705 +1

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.