Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J389 · Door control module, rear, right

Name
Door control module, rear, right
Type
control module / relay
Models
B6 and B7
Diagrams
6

Location

Integrated in electric window motormanual text Manual pages 1167

Other location statements (4)
  • Integrated in Right Rear Window Regulator Motor -V27-manual text p. 1318, p. 1321
  • In the right rear doorinferred from name
  • Wired into the instrument panel wiring harnessinferred from wiring
  • Its wires run through T20c (Door B-pillar, right)inferred from wiring

Area: Doors

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

T10h · 10-Pin Connector, black, on door control module, rear, right likely Power & CAN bus

T10h · 10-Pin Connector, black, on door control module, rear, right · diagrams 6, 35, 67, 110, 111, 318

Pin positions schematic: check the numbers moulded on the housing

10 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: black sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T10h pin 1

Colour
br 2.5 mm²
Function
Ground (terminal 31) at 78 (On right lower B-pillar)stated
Far ends
none found
via 78
Wire
Ground (terminal 31) at 78 (On right lower B-pillar)
Ground (terminal 31) at 78 (On right lower B-pillar)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10h pin 2

Colour
ro/ge 0.5 mm²
Function
Fused supply from S223 (15 A)derived
Far ends
S223/23a, J388/2
Wire
Fused supply from S223 (15 A)
Fused supply from S223 (15 A)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10h pin 3

Colour
ro/gr 0.5 mm²
Function
Comfortstated
Far ends
J386/3, J387/3, J388/3, J393/10
via B207
Wire
Comfort
Comfort
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10h pin 4

Colour
or/gn 0.35 mm²
Function
Comfort CAN Highstated
Far ends
J386/4, J387/4, J388/4, J393/13, J136/9, J255/C/11, J285/17, J345/I/3, J364/I/8, J446/14, J503/1 and 3 more
via A146
Wire
Comfort CAN High
Diagrams
6, 35, 67, 110, 111, 318

Row in the pin table

T10h pin 5

Colour
or/br 0.35 mm²
Function
Comfort CAN Lowstated
Far ends
J386/5, J387/5, J388/5, J393/12, J136/10, J255/C/12, J285/18, J345/I/4, J364/I/7, J446/7, J503/2 and 3 more
via A147
Wire
Comfort CAN Low
Diagrams
6, 35, 67, 110, 111, 318

Row in the pin table

T10h pin 6

Colour
ro/bl 2.5 mm²
ro/sw
Function
not stated
Far ends
J388/6, S280/2
Wire
Wire between J388 and J389 (+3)
Wire between J388 and J389 (+3)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T10h pin 7

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T10h pin 8

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T10h pin 9

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T10h pin 10

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

PinWireFunctionConnects toModelsSheets
1
br 2.5 mm²
Ground (terminal 31) at 78 (On right lower B-pillar)stated
via 78
B6 and B783 325 497 707 +1
2
ro/ge 0.5 mm²
Fused supply from S223 (15 A)derived
S223/23a, J388/2B6 and B783 325 497 707 +1
3
ro/gr 0.5 mm²
Comfortstated
J386/3, J387/3, J388/3, J393/10
via B207
B6 and B783 325 497 707 +1
4
or/gn 0.35 mm²
Comfort CAN Highstated
J386/4, J387/4, J388/4, J393/13, J136/9, J255/C/11, J285/17, J345/I/3, J364/I/8, J446/14, J503/1 and 3 more
via A146
B6 and B783 325 497 707 +2
5
or/br 0.35 mm²
Comfort CAN Lowstated
J386/5, J387/5, J388/5, J393/12, J136/10, J255/C/12, J285/18, J345/I/4, J364/I/7, J446/7, J503/2 and 3 more
via A147
B6 and B783 325 497 707 +2
6
ro/bl 2.5 mm²
ro/sw
not statedJ388/6, S280/2B6 and B783 325 497 707 +1

T12c · 12-Pin Connector, black, on door control module, rear, right likely Motors/actuators & Switches

T12c · 12-Pin Connector, black, on door control module, rear, right · diagrams 6, 35, 67, 110, 318

Pin positions schematic: check the numbers moulded on the housing

12 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: black sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T12c pin 1

Colour
bl 0.35 mm²
Function
not stated
Far ends
F134/verr., F134/3
Wire
Wire between F134 and J389
Wire between F134 and J389
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12c pin 2

Colour
li/ge 0.35 mm²
Function
not stated
Far ends
F246/safe, F246/5
Wire
Wire between F246 and J389
Wire between F246 and J389
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12c pin 3

Colour
gr/li 0.35 mm²
Function
Door contact signal (TK)derived
Far ends
F11/TK, F11/4
Wire
Door contact signal (TK)
Door contact signal (TK)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12c pin 4

Colour
gr/gn 0.35 mm²
Function
not stated
Far ends
V97/V--, V97/1
Wire
Wire between J389 and V97
Wire between J389 and V97
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12c pin 5

Colour
br/bl 0.35 mm²
Function
not stated
Far ends
V97/V+, V97/2
Wire
Wire between J389 and V97
Wire between J389 and V97
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12c pin 6

Colour
gr/bl 0.35 mm²
Function
not stated
Far ends
V164/S+, V164/7
Wire
Wire between J389 and V164
Wire between J389 and V164
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12c pin 7

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12c pin 8

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12c pin 9

Colour
br 0.35 mm²
Function
Ground (terminal 31)derived
Far ends
F246/KL.31, F246/6
Wire
Ground (terminal 31)
Ground (terminal 31)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T12c pin 10

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12c pin 11

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T12c pin 12

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

PinWireFunctionConnects toModelsSheets
1
bl 0.35 mm²
not statedF134/verr., F134/3B6 and B784 326 498 708 +1
2
li/ge 0.35 mm²
not statedF246/safe, F246/5B6 and B784 326 498 708 +1
3
gr/li 0.35 mm²
Door contact signal (TK)derived
F11/TK, F11/4B6 and B784 326 498 708 +1
4
gr/gn 0.35 mm²
not statedV97/V--, V97/1B6 and B784 326 498 708 +1
5
br/bl 0.35 mm²
not statedV97/V+, V97/2B6 and B784 326 498 708 +1
6
gr/bl 0.35 mm²
not statedV164/S+, V164/7B6 and B784 326 498 708 +1
9
br 0.35 mm²
Ground (terminal 31)derived
F246/KL.31, F246/6B6 and B784 326 498 708 +1

T16e · 16-Pin Connector, brown, door control module, rear, right likely Lighting

T16e · 16-Pin Connector, brown, door control module, rear, right · diagrams 6, 35, 67, 110, 318

Pin positions schematic: check the numbers moulded on the housing

16 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: brown sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.

Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.

Tap a pin for what it does and where its wire goes.

T16e pin 1

Colour
bl/br 0.35 mm²
Function
Dimmed switch illumination (terminal 58s)stated
Far ends
E54/1/58, L111/2
via R55
Wire
Dimmed switch illumination (terminal 58s)
Dimmed switch illumination (terminal 58s)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16e pin 2

Colour
br/ge 0.35 mm²
Function
not stated
Far ends
W34/2
Wire
Wire between J389 and W34
Wire between J389 and W34
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16e pin 3

Colour
br/li 0.35 mm²
Function
not stated
Far ends
W38/2
Wire
Wire between J389 and W38
Wire between J389 and W38
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16e pin 4

Colour
sw/gn 0.35 mm²
Function
not stated
Far ends
E54/3/HR, E54/2/HR
Wire
Wire between E54 and J389
Wire between E54 and J389
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16e pin 5

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 6

Colour
br 0.35 mm²
Function
Ground (terminal 31) at 78 (On right lower B-pillar), 77 (On left lower B-pillar)stated
Ground (terminal 31) at 78 (On right lower B-pillar)stated
Far ends
L111/1, W34/1, W38/1, E54/2/31, E54/5/31
via 208
Wire
Ground (terminal 31) at 78 (On right lower B-pillar), 77 (On left low…
Ground (terminal 31) at 78 (On right lower B-pillar)
Diagrams
6, 35, 67, 110, 318

Row in the pin table

T16e pin 7

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 8

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 9

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 10

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 11

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 12

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 13

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 14

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 15

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

T16e pin 16

No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.

PinWireFunctionConnects toModelsSheets
1
bl/br 0.35 mm²
Dimmed switch illumination (terminal 58s)stated
E54/1/58, L111/2
via R55
B6 and B783 325 497 707 +1
2
br/ge 0.35 mm²
not statedW34/2B6 and B783 325 497 707 +1
3
br/li 0.35 mm²
not statedW38/2B6 and B783 325 497 707 +1
4
sw/gn 0.35 mm²
not statedE54/3/HR, E54/2/HRB6 and B783 325 497 707 +1
6
br 0.35 mm²
Ground (terminal 31) at 78 (On right lower B-pillar), 77 (On left lower B-pillar)stated
Ground (terminal 31) at 78 (On right lower B-pillar)stated
L111/1, W34/1, W38/1, E54/2/31, E54/5/31
via 208
B6 and B783 325 497 707 +1

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.