J364 · Control module for auxiliary heater
- Name
- Control module for auxiliary heater
- Type
- control module / relay
- Models
- B6 and B7
- Diagrams
- 3
Location
Wired into the instrument panel wiring harnessinferred from wiring · 6 of 6 named splices on its wires
Other location statements (1)
- Its wires run through T10k (Connector station - left A-pillar)inferred from wiring
Area: Instrument panel
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely CAN bus
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
7 | or/br 0.35 mm² | Comfort CAN Lowstated | E87/C/12, J285/18, J393/5/12, J446/7, J519/12, J527/8, J136/10, J345/I/4, J393via A147 | B6 only | 265 1068 |
8 | or/gn 0.35 mm² | Comfort CAN Highstated | E87/C/11, J285/17, J393/5/13, J446/14, J519/13, J527/9, J136/9, J345/I/3, J393via A146 | B6 only | 265 1068 |
I/7 | or/br 0.35 mm² | Comfort CAN Lowstated | J136/10, J255/C/12, J285/18, J345/I/4, J386/5, J387/5, J388/5, J389/5, J393/12, J446/7, J503/2, J519/12 and 2 morevia A147 | B7 only | 715 |
I/8 | or/gn 0.35 mm² | Comfort CAN Highstated | J136/9, J255/C/11, J285/17, J345/I/3, J386/4, J387/4, J388/4, J389/4, J393/13, J446/14, J503/1, J519/13 and 2 morevia A146 | B7 only | 715 |
Diagrams
- 30 · CAN-Bus wiring B6 · From 2004 m. y.
- 111 · Can-Bus wiring B7 · From 2006 m. y.
- 331 · CAN-Bus wiring B6 · From 2002 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.