Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

How to find a fault

How to use the wiki at the car when something does not work. It says where to look, not what is wrong with your car.

Set your car with the car button in the header: generation, body, engine and gearbox. Every generated list then hides the rows that belong to other cars and says how many it hid, with one button to show everything again. Articles written for the other generation say so at the top. The setting stays in this browser.

  • By system: each system has a hub page with its fuses, ground points, control modules and diagrams. Start there when you know roughly what has failed.
  • By part: type the code (J519) or a name (window motor) into the search box, or open the component list. A component page has the location, every pin with wire colour and far ends, and the diagrams it is drawn in.
  • By place: Locations lists the connector stations, ground points and parts by area of the car.

Each hub opens with Check first: the system’s fuses, its ground points and the supply and ground pins of its control modules, all taken from the wiring data. A sensible order:

  1. Fuse. Find the fuse in the hub’s table: rating, its position in the fuse panel (the panel changed for model year 2006, so both are listed) and the terminal that feeds it. The fuses and relays page has the whole panel and the relay carriers.
  2. Ground. The hub lists the ground points the system’s wiring runs to, with where they are. A ground point page lists everything joined there, which helps when several things fail at once.
  3. Supply. Open a control module in Supply and ground pins to see which pins should carry terminal 30 (permanent positive), 15 (ignition on), 75 (ignition on, off while cranking) and 31 (ground).
  4. Signal. For the rest, open the component page: every pin shows its wire colour, what the wire carries as far as the data knows, and the other ends of the circuit. Each row links to the sheet of the factory manual it was read from.

Terminal numbers and the manual’s colour codes are explained in wire colours and terminals and the glossary.

The generated pages were extracted from the manual by software. Every location and wire function says how it was worked out:

manual text
Location: stated in the manual's Component Locations sections.
manual figure
Location: shown in a manual figure, no text location.
sheet legend
Location: stated in a wiring sheet legend.
inferred from wiring
Location: inferred from the harness or connector station its wires use.
inferred from name
Location: inferred from the component name.
outside reference
Location: general B6/B7 platform knowledge, not from this manual.
corrected
Location: changed by a hand-written correction (data/corrections.json).
stated
Wire function: stated by the manual.
derived
Wire function: derived from terminal markings, fuse or colour code.
endpoints only
Wire function: described from its endpoints only.

Green: the manual states it. Blue: shown in a manual figure, or worked out from the wiring or the terminal markings. Orange: taken from a name or from outside the manual, or only the ends of the wire are known. Treat orange as a lead, not a fact. How much of the data is which, what has been corrected and what is still known to be wrong: data quality. Articles carry their own status badge (verified, community write-up, researched, work in progress, stub); see About this wiki.

When a page disagrees with the car or with the manual sheet it links to, note:

  • the page and the row (component and pin, splice or ground point),
  • what the manual sheet shows, with its page number,
  • what you found on the car, if you measured.

The extracted data is never edited by hand. A wrong entry becomes a correction with that evidence in the repository’s data/corrections.json, and the next rebuild applies it everywhere it appears; docs/corrections.md in the repository has the steps. Hubs also show the problems with their data that are already known.