F224 · Driver's Lumbar Support Pressure Switch
- Name
- Driver's Lumbar Support Pressure Switch
- Type
- switch
- Models
- B7 only
- Diagrams
- 1
Location
In or under the driver's seatinferred from name
Area: Seats
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely CAN bus
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | or/ge 0.5 mm² | not stated | J810/30 | B7 only | 731 |
2 | or/gn 0.5 mm² | F224 Driver's Lumbar Support Pressure Switch pin 2 — line to J810 T32j/2 (switch line, not a CAN wire)stated | J810/2 | B7 only | 731 |
Diagrams
- 116 · Power seats with lumbar support and electrically seat heating B7 · From 2006 m.y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.