ABS and ESP
Check first
Generated from the wiring data for this system’s 4 diagrams (listed under In the wiring data): the fuses, the ground points and the supply and ground pins of its control modules. These lists are not checked by hand, whatever the article's own status: each line says how it was worked out. Check anything important against the manual sheet before you cut or splice.
Fuses
| Fuse | Rating | Terminal | Where | Feeds here |
|---|---|---|---|---|
S3 | 5 A | 75x | Panel to 2005 MY: no. 3 p. 1113 Panel from 2006 MY: no. 3 p. 1117 | drawn in this system’s diagrams |
S5 | 10 A | 15 | Panel to 2005 MY: no. 5 p. 1113 Panel from 2006 MY: no. 5 p. 1117 | drawn in this system’s diagrams |
S7 | 10 A | 15 | Panel to 2005 MY: no. 7 p. 1113 Panel from 2006 MY: no. 7 p. 1117 | F47 J104 |
S10 | 5 A | 15 | Panel to 2005 MY: no. 10 p. 1114 Panel from 2006 MY: no. 10 p. 1118 | drawn in this system’s diagrams |
S13 | 10 A | 30 | Panel to 2005 MY: no. 13 p. 1114 Panel from 2006 MY: no. 13 p. 1118 | J527 |
S14 | 10 A | 30 | Panel to 2005 MY: no. 14 p. 1114 Panel from 2006 MY: no. 14 p. 1118 | F |
S15 | 10 A | 30 | Panel to 2005 MY: no. 15 p. 1114 Panel from 2006 MY: no. 15 p. 1118 | J285 |
S123 | 50 A / 40 A | Relay carrier (4-position) with threaded connection, through 2005 MY, position H Relay carrier (4-position) with threaded connection, from 2006 MY, position H | drawn in this system’s diagrams | |
S224 | 20 A | 30 | Panel to 2005 MY: no. 24 p. 1114 Panel from 2006 MY: no. 24 p. 1118 | J393 |
S230 | 20 A | 30 | Panel to 2005 MY: no. 30 p. 1115 Panel from 2006 MY: no. 30 p. 1118 | drawn in this system’s diagrams |
S238 | 15 A | 30 | Panel to 2005 MY: no. 38 p. 1116 Panel from 2006 MY: no. 38 p. 1119 | J393 |
S239 | 20 A | 30 | Panel to 2005 MY: no. 39 p. 1116 Panel from 2006 MY: no. 39 p. 1119 | J402 |
S242 | 25 A | 30 | Panel to 2005 MY: no. 42 p. 1116 Panel from 2006 MY: no. 42 p. 1120 | J104 |
S243 | 15 A | 15 | Panel to 2005 MY: no. 43 p. 1116 Panel from 2006 MY: no. 43 p. 1120 | drawn in this system’s diagrams |
Ground points
| Point | Where |
|---|---|
26 | On front apronmanual text |
33 | Behind instrument panel, rightmanual text |
135 | Splice inside the instrument panel wiring harnesssheet legend |
179 | Splice inside the left headlight wiring harnesssheet legend |
238 | Splice inside the wiring harnesssheet legend |
Supply and ground pins
Terminal 30 (permanent positive), 15 (ignition), 75 (off while cranking) and 31 (ground) pins of the control modules, from the wire labels. A pin opens its wire, traced to the fuse or ground point; open a module for all its pins.
J104 ABS Control Module (w/EDL) · 8 pins
| Pin | Carries | Wire | Fuse / ground |
|---|---|---|---|
1 | Ground (terminal 31) at 26 (On front apron)stated | br | 26 |
5 | Ground (terminal 31) at 26 (On front apron)stated | br | 26 |
6 | Fused supply from S242 (25 A, terminal 30) to J104 ABS Control Modulederived | ro/li | S242 |
13 | Ground (terminal 31) at 26 (On front apron)stated | br | 26 |
23 | Ignition-switched positive, fused (terminal 15a), fused by S7 (10 A, terminal 15)stated | sw/br | S7 |
25 | Fused supply from S242 (25 A, terminal 30) to J104 ABS Control Modulederived | ro/li | S242 |
38 | Ground (terminal 31) at 26 (On front apron)stated | br | 26 |
501 | Battery positive, permanent (terminal 30)stated | ro | S230 |
J285 Control module with indicator unit in instrument panel insert · 4 pins
J393 Central control module for comfort system · 2 pins
J402 Control module for operating electronics, navigation · 5 pins
| Pin | Carries | Wire | Fuse / ground |
|---|---|---|---|
T20d/3 | Ground (terminal 31) at 610 (Audio)stated | br | |
T26/4 | Ignition-switched positive (terminal 15)stated | sw | |
T8/5 | Battery positive, permanent (terminal 30), from radio, fused by S239 (20 A, terminal 30)stated | ro/bl | S239 |
T8/7 | Battery positive, permanent (terminal 30), from radio, fused by S239 (20 A, terminal 30)stated | ro/bl | S239 |
T8/8 | Ground (terminal 31) at 610 (Audio)stated | br | 610 |
J527 Steering Column Electronic Systems Control Module · 5 pins
| Pin | Carries | Wire | Fuse / ground |
|---|---|---|---|
T16a/1 | Ground (terminal 31) at 33 (Behind instrument panel, right)stated | br | 33 135 |
T16a/2 | Fused supply from S13 (10 A, terminal 30) to J527 Steering Column Electronic Systems Control Modulederived | ro/ge | S13 |
T16a/12 | Load-reduction positive (terminal 75, off while cranking)stated | ge/swor | S3 |
T16a/12 | Load-reduction positive (terminal 75, off while cranking)derived | ro | |
T16a/13 | Ignition-switched positive (terminal 15)stated | sw | S5 S7 S10 |
The factory wiring manual draws this system in 4 diagrams: “ABS, with ESP (4.2 l - Injection Engine)” (B6: 14), “Anti-Lock Brake System (ABS) with Electronic Differential Lock (EDL), Anti-Slip Regulation (ASR), Electronic Brake Pressure” (B7: 52, 104) and “ABS, with ESP” (B6: 309). Nothing has been written about it here yet; the lists on this page are generated from those diagrams.
In the wiring data
Everything drawn in this system’s diagrams of the factory manual, generated when the site is built. A part drawn in several systems is listed on each of them. Locations say how they were worked out; the component pages have every pin.
Control modules
Other components
Ignition switch (1)
DIgnition/Starter Switch
Sensor (8)
G44Right Rear ABS Wheel Speed SensorG45Right Front ABS Wheel Speed SensorG46Left Rear ABS Wheel Speed SensorG47Left Front ABS Wheel Speed SensorG200Transverse Acceleration SensorG201Brake pressure sensor 1G202Sender for Rotation RateG251Longitudinal Acceleration Sensor
Solenoid / valve / coil (9)
N100Right Front ABS Outlet ValveN101Left Front ABS Inlet ValveN102Left Front ABS Outlet ValveN134Left Rear ABS Inlet ValveN135Right Rear ABS Outlet ValveN136Left Rear ABS Outlet ValveN225Pilot valve -1- traction controlN226Pilot valve -2- traction controlN227High pressure switch valve -1- traction control
Switch (4)
E132Anti-Slip Control SwitchFBrake Light SwitchF9Parking Brake Warning Light SwitchF47Brake Pedal Switch
Splices
A2Ignition-switched positive (terminal 15)A18Brake lights (terminal 54)A20Ignition-switched positive, fused (terminal 15a)A24Brake system monitoringA27Vehicle speed signalA32Battery positive, permanent (terminal 30)A57Battery positive, permanent (terminal 30)A76K-line (diagnosis)A99Relay output (terminal 87)A121Drivetrain CAN HighA122Drivetrain CAN LowA133Left ABS ImpulseA154Brake Light SwitchA175Dimmed switch illumination (terminal 58s)
Diagrams
- 14 ABS, with ESP (4.2 l - Injection Engine) (B6 only)
- 52 Anti-Lock Brake System (ABS) with Electronic Differential Lock (EDL), Anti-Slip Regulation (ASR), Electronic Brake Pressure (B7 only)
- 104 Anti-Lock Brake System (ABS) with Electronic Differential Lock (EDL), Anti-Slip Regulation (ASR), Electronic Brake Pressure (B7 only)
- 309 ABS, with ESP (B6 only)
Component locations: ABS
Related articles
Modify
- B7 multifunction steering wheel
- Cruise control retrofit
- Electric rear windows
- Installing an aftermarket head unit
- RS4-style start button
Understand
- B6 vs B7 electrical differences
- CAN bus basics (SSP 238)
- Drivetrain and convenience CAN (SSP 269)
- Occupant protection (airbags and belt tensioners)
- Running gear, brakes and ESP
- Vehicle electrical system (J519, J527, MCB)