Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between E587 and J810 (+1)

Net n611a00db · one diagram

Function
E587 Driver's Seat Bolster Inflation Adjustment Button — line to J810 Front Passenger's Power Seat Control Module T32j/18endpoints only
Basis: named after the two parts it connects
Wire
br/wsgr
Models
B7 only
Drawn in
1 diagram, 1 stretch
Checked
Not checked by hand. Extracted from the manual automatically.

1 guessed component

What is on this wire

Parts (2)

  • E587pin 2guessDriver's Seat Bolster Inflation Adjustment Button
  • J810pin T32j/18Front Passenger's Power Seat Control Module

Inline connectors (1)

  • T2aipin 2Double Connector, black, behind panel on seat in front area

Where these parts are

PartLocation
E587In or under the driver's seatinferred from name
J810In or under the front passenger's seatinferred from name
T2aiBehind panel on seat in front areasheet legend

Drawing

Wires are br/ws (brown/white) unless a colour is written on them. 3 parts and points, 2 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

  • guess: the component label is not right at the symbol; the part was assigned by position.
116 · Power seats with lumbar support and electrically seat heating B7 · 1 stretch

Diagram 116 page

Page 730manual · Driver's Seat Lumbar Support Adjustment Switch, Driver's Seat Bolster Inflation Adjustment Button, Driver's Backrest Bolster Inflation Adjustment Button

TrackWireFromToNotes
33gr → br/ws 0.5 mm²E587 2guessJ810 T32j/18
via T2ai/2

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.