Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G40 · Camshaft Position (CMP) Sensor

Name
Camshaft Position (CMP) Sensor
Type
sensor
Models
B6 and B7
Diagrams
10

Location

Its wires run through T10z (In engine compartment)inferred from wiring · 2 wires

Other location statements (1)

Area: Engine

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Module links

PinWireFunctionConnects toModelsSheets
2
gn/gr 0.35 mm²
not statedJ623/44B7 only524
3
br/sw 0.35 mm²
Sensor groundstated
G247/1, G410/1, G42/2, G62/1, J623/14, V157/3
via 220
B7 only524
1/+
ro/sw 0.35 mm²
5 V sensor supplystated
G163/1/+, G300/1/+, G301/1/+, G294/3, J220/98, J623/11
via D141
B6 and B7105 574 872
1/+
ws/sw 0.35 mm²
5 V sensor supplystated
G294/3, G31/3, J220/98
via D141
B6 only124 892
1/+
sw/ws 0.35 mm²
5 V sensor supplystated
G247/3/+, G28/1/+, G336/1/+, J623/26
via D174
B7 only609 806
2/S
gn/sw 0.35 mm²
J220 Motronic Engine Control Module: relay switched output (87) to G40 Camshaft Position Sensorderived
J220/87, J623/25B6 and B7105 574 872
2/S
gn/li 0.35 mm²
not statedJ220/81B6 only105 872
2/S
bl/li 0.35 mm²
J220 Motronic Engine Control Module: relay switched output (87) to G40 Camshaft Position Sensorderived
J623 Engine Control Module: relay switched output (87) to G40 Camshaft Position Sensorderived
J220/87, J623/87B6 and B7141 554
2/S
ws/gr 0.35 mm²
not statedJ623/44B7 only609 806
3/--
sw 0.5 mm²
Sensor groundstated
J220/108, G294/1, G163/3/--, G2/3G, G300/3/--, G42/2, G62/1, G62/3, J623/108, G2/3
via 220, 316
B6 and B7105 124 554 872 +1
3/--
br/gr 0.5 mm²
Sensor groundstated
G163/3/--, J220/108
via 220
B6 only141
3/--
br/sw 0.5 mm²
Sensor groundstated
G163/3/--, G247/1/--, G300/3/--, G301/3/--, G336/3/--, G410/1/--, G42/1/--, G512/3/--, G62/1, J623/40
via 327
B7 only574
3/--
br/bl 0.35 mm²
Sensor groundstated
via 220
B7 only609 806

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.