Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G300 · Camshaft Position (CMP) Sensor 3

Name
Camshaft Position (CMP) Sensor 3
Type
sensor
Models
B6 and B7
Diagrams
5

Location

Shown in the manual's location figures: Engine; 3.0L AVK and BGN; 3.2L BKH; 4.2L BNSmanual figure Manual pages 1192, 1213, 1217, 1224, 1228, 1243, 1246

Area: Engine

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Module links

PinWireFunctionConnects toModelsSheets
1/+
ro/sw 0.35 mm²
5 V sensor supplystated
G163/1/+, G301/1/+, G40/1/+, G294/3, J220/98, J623/11
via D141
B6 and B7105 574 872
1/+
ro/gr 0.35 mm²
not statedJ623/37B7 only608 805
2/S
gn/br 0.35 mm²
J220 Motronic Engine Control Module: relay coil (86) to G300 Camshaft Position Sensor 3derived
J220/86B6 only105 872
2/S
gn/li 0.35 mm²
not statedJ623/54B7 only574
2/S
ws/sw 0.35 mm²
not statedJ623/59B7 only608 805
3/--
sw 0.5 mm²
Sensor groundstated
G2/3G, G40/3/--, J220/108
via 220
B6 only105 872
3/--
br/sw 0.5 mm²
Sensor groundstated
G163/3/--, G247/1/--, G301/3/--, G336/3/--, G40/3/--, G410/1/--, G42/1/--, G512/3/--, G62/1, J623/40
via 327
B7 only574
3/--
br/bl 0.35 mm²
Sensor groundstated
J623/52
via 220
B7 only608 805

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.