Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G163 · Camshaft Position (CMP) Sensor 2

Name
Camshaft Position (CMP) Sensor 2
Type
sensor
Models
B6 and B7
Diagrams
7

Location

Shown in the manual's location figures: Engine; 3.0L AVK and BGN; 3.2L BKH; 4.2L BHFmanual figure Manual pages 1192, 1213, 1218, 1227, 1228, 1236, 1237, 1245

Area: Engine

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Module links

PinWireFunctionConnects toModelsSheets
1/+
ro/sw 0.35 mm²
5 V sensor supplystated
G300/1/+, G301/1/+, G40/1/+, G294/3, J220/98, J623/11
via D141
B6 and B7105 574 872
1/+
gn/sw 0.5 mm²
5 V sensor supplystated
J220/98, J623/98
via D141
B6 and B7141 554
1/+
sw/br 0.35 mm²
5 V sensor supplystated
G512/1/+, J624/26
via D190
B7 only618 816
2/S
gn/ws 0.35 mm²
or
not statedJ220/54B6 only105 872
2/S
gn/li 0.35 mm²
J220 Motronic Engine Control Module: relay coil (86) to G163 Camshaft Position Sensor 2derived
J623 Engine Control Module: relay coil (86) to G163 Camshaft Position Sensor 2derived
J220/86, J623/86B6 and B7141 554
2/S
gn/br 0.35 mm²
not statedJ623/9B7 only574
2/S
li/br 0.35 mm²
not statedJ624/44B7 only618 816
3/--
sw 0.5 mm²
Sensor groundstated
G40/3/--, G294/1, G301/3/--, J624/52, J623/108
via 220, 316, 328
B6 and B7105 554 618 816 +1
3/--
br/gr 0.5 mm²
Sensor groundstated
G40/3/--, J220/108
via 220
B6 only141
3/--
br/sw 0.5 mm²
Sensor groundstated
G247/1/--, G300/3/--, G301/3/--, G336/3/--, G40/3/--, G410/1/--, G42/1/--, G512/3/--, G62/1, J623/40
via 327
B7 only574

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.