Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G31 · Charge Air Pressure Sensor

Name
Charge Air Pressure Sensor
Type
sensor
Models
B6 only
Diagrams
2

Location

And installed on top of charge air coolermanual text Manual pages 1195 · 1.8L T AMB

Other location statements (1)
  • Installed into top of the charge air coolermanual text p. 1197

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Sensors

PinWireFunctionConnects toModelsSheets
1
sw/ro 0.35 mm²
J220 Motronic Engine Control Module: relay coil (85) to G31 Charge Air Pressure Sensorderived
J220/85B6 only122 890
3
ws/sw 0.35 mm²
5 V sensor supplystated
G294/3, G40/1/+, J220/98
via D141
B6 only122 890
4
gr/bl 0.35 mm²
not statedJ220/101B6 only122 890

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.