Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G512 · Intake Manifold Runner Position Sensor 2

Name
Intake Manifold Runner Position Sensor 2
Type
sensor
Models
B7 only
Diagrams
3

Location

Wired into the engine wiring harnessinferred from wiring · 2 of 4 named splices on its wires

Other location statements (1)

Area: Engine

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Module links

PinWireFunctionConnects toModelsSheets
1/+
bl/ro 0.35 mm²
5V connectionstated
G247/3/+, G336/1/+, G410/3/+, G42/3/+, J623/29
via D174
B7 only575
1/+
sw/br 0.35 mm²
5 V sensor supplystated
G163/1/+, J624/26
via D190
B7 only618 816
2/S
gr/ge 1.0 mm²
not statedJ623/50B7 only575
2/S
ge/ws 0.35 mm²
not statedJ624/22B7 only618 816
3/--
br/sw 0.35 mm²
or
Sensor groundstated
G163/3/--, G247/1/--, G300/3/--, G301/3/--, G336/3/--, G40/3/--, G410/1/--, G42/1/--, G62/1, J623/40
via 327
B7 only575
3/--
sw 0.35 mm²
not statedJ624/14B7 only618 816

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.