Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G301 · Camshaft Position (CMP) Sensor 4

Name
Camshaft Position (CMP) Sensor 4
Type
sensor
Models
B6 and B7
Diagrams
5

Location

Wired into the wiring harnessinferred from wiring · 3 of 6 named splices on its wires

Other location statements (1)

Area: Engine

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Module links

PinWireFunctionConnects toModelsSheets
1/+
ro/sw 0.35 mm²
5 V sensor supplystated
G163/1/+, G300/1/+, G40/1/+, G294/3, J220/98, J623/11
via D141
B6 and B7105 574 872
1/+
sw/br 0.35 mm²
not statedJ624/37B7 only618 816
2/S
gn/ws 0.35 mm²
not statedJ623/24B7 only574
2/S
ws/li 0.35 mm²
not statedJ624/59B7 only618 816
3/--
br/sw 0.5 mm²
Sensor groundstated
G163/3/--, G247/1/--, G300/3/--, G336/3/--, G40/3/--, G410/1/--, G42/1/--, G512/3/--, G62/1, J623/40
via 327
B7 only574
3/--
sw 0.35 mm²
Sensor groundstated
G163/3/--, J624/52
via 328
B7 only618 816

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.