V157 · Intake Flap Motor
- Name
- Intake Flap Motor
- Type
- motor
- Models
- B7 only
- Diagrams
- 1
Location
Shown in the manual's location figures: 2.0L BPG and BWTmanual figure Manual pages 1204, 1207
Area: Engine
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Sensors
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
3 | br/sw 0.35 mm² | Sensor groundstated | G247/1, G40/3, G410/1, G42/2, G62/1, J623/14via 220 | B7 only | 523 |
5 | ro/li 1.0 mm² | not stated | F96/34 | B7 only | 523 |
Diagrams
- 78 · 2.0 l - TFSI - Injection Engine (147 kW - Motronic - 4 Cylinder), engine codes BGB, BPG B7 · From November 2004
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.