J220 Motronic Engine Control Module: relay coil (86) to G300 Camshaft Position Sensor 3
Net n87908541 · joined across diagrams
- Function
- J220 Motronic Engine Control Module: relay coil (86) to G300 Camshaft Position Sensor 3derivedBasis: relay terminal 86 printed at J220
- Wire
gn/br- Models
- B6 only · 3.0 V6
- Drawn in
- 2 diagrams, 2 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams2 guessed components
What is on this wire
Parts (2)
Where these parts are
| Part | Location |
|---|---|
G300 | Shown in the manual's location figures: Engine; 3.0L AVK and BGN; 3.2L BKH; 4.2L BNSmanual figure p. 1192 p. 1213 p. 1217 |
J220 | In electronics box, plenum chambermanual text p. 1122 |
Drawing
Wires are gn/br (green/brown) unless a colour is written on them. 2 parts and points, 1 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
9 · 3.0 l - Injection Engine (162 kW - Motronic - 6 Cylinder) engine code AVK, BGN B6 · 1 stretch
Diagram 9 page · joined to other diagrams at J220/86
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.