Sensor ground
Net nf13c7b92 · joined across diagrams
- Function
- Sensor groundstatedBasis: ground connection 220
- Wire
br/blsw- Models
- B7 only · 4.2 RS4
- Drawn in
- 2 diagrams, 24 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams, 1 not certain16 stretches to check2 guessed components
What is on this wire
Parts (2)
Grounds (1)
220Ground connection (sensor Ground), in engine wiring harness (ground connection in the harness)
Inline connectors (2)
Where these parts are
| Part | Location |
|---|---|
G300 | Shown in the manual's location figures: Engine; 3.0L AVK and BGN; 3.2L BKH; 4.2L BNSmanual figure p. 1192 p. 1213 p. 1217 |
J623 | Under the plenum chamber covermanual text p. 1204 |
220 | Splice inside the engine wiring harnesssheet legend |
T3g | On engine blocksheet legend |
T3k | On engine blocksheet legend |
Drawing
Wires are br/bl (brown/blue) unless a colour is written on them. 28 parts and points, 28 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
- guess: the component label is not right at the symbol; the part was assigned by position.
- check: the extraction marked the stretch for a look at the sheet.
102 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · 12 stretches
Diagram 102 page · joined to other diagrams at G300/3/--medium
Page 608manual · Engine Control Module (ECM), Knock Sensor (KS), Camshaft Position (CMP) Sensor
| Track | Wire | From | To | Notes |
|---|---|---|---|---|
| 102 | no colour | joint | joint | check |
| 102 | no colour | joint | joint | via checkT3g/3 |
| 102 | no colour | joint | joint | check |
| 102 | sw 0.35 mm² | splice 220 | joint | |
| 102 | no colour | joint | joint | check |
| 102 | br/bl 0.5 mm² | J623 T60/52 | splice 220 | |
| 106 | no colour | joint | joint | check |
| 106 | no colour | joint | joint | via checkT3k/3 |
| 106 | no colour | joint | joint | check |
| 106 | sw 0.35 mm² | splice 220 | joint | |
| 106 | no colour | joint | joint | check |
| 108 | br/bl 0.35 mm² | splice 220 | G300 3/--guess |
128 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · 12 stretches
Diagram 128 page · joined to other diagrams at G300/3/--medium
Page 805manual · Engine Control Module (ECM), Knock Sensor (KS), Camshaft Position (CMP) Sensor
| Track | Wire | From | To | Notes |
|---|---|---|---|---|
| 102 | no colour | joint | joint | check |
| 102 | no colour | joint | joint | via checkT3g/3 |
| 102 | no colour | joint | joint | check |
| 102 | sw 0.35 mm² | splice 220 | joint | |
| 102 | no colour | joint | joint | check |
| 102 | br/bl 0.5 mm² | J623 T60/52 | splice 220 | |
| 106 | no colour | joint | joint | check |
| 106 | no colour | joint | joint | via checkT3k/3 |
| 106 | no colour | joint | joint | check |
| 106 | sw 0.35 mm² | splice 220 | joint | |
| 106 | no colour | joint | joint | check |
| 108 | br/bl 0.35 mm² | splice 220 | G300 3/--guess |
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.