Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

Wire between G163 and J624

Net n4650ef5d · joined across diagrams

Function
G163 Camshaft Position Sensor 2 — line to J624 Engine Control Module 2 T60a/44endpoints only
Basis: named after the two parts it connects
Wire
li/br
Models
B7 only · 4.2 RS4
Drawn in
2 diagrams, 2 stretches
Checked
Not checked by hand. Extracted from the manual automatically.

1 join between diagrams, 1 not certain2 guessed components

What is on this wire

Parts (2)

  • G163pin 2/SguessCamshaft Position (CMP) Sensor 2
  • J624pin T60a/44Engine Control Module (ECM) 2

Where these parts are

PartLocation
G163Shown in the manual's location figures: Engine; 3.0L AVK and BGN; 3.2L BKH; 4.2L BHFmanual figure p. 1192 p. 1213 p. 1218
J624Under the plenum chamber covermanual text p. 1243

Drawing

Wires are li/br (lilac/brown) unless a colour is written on them. 2 parts and points, 1 connections.

A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.

Stretch by stretch

Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.

  • guess: the component label is not right at the symbol; the part was assigned by position.
102 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · 1 stretch

Diagram 102 page · joined to other diagrams at G163/2/Smedium

Page 618manual · Engine Control Module (ECM) 2, Camshaft Position (CMP) Sensor, Intake Manifold Runner Position Sensor 2

TrackWireFromToNotes
245li/br 0.35 mm²J624 T60a/44G163 2/Sguess
128 · 4,2 l - FSI - Injection Engine (309 kW - Motronic - cylinder 8) engine code BNS B7 · 1 stretch

Diagram 128 page · joined to other diagrams at G163/2/Smedium

Page 816manual · Engine Control Module (ECM) 2, Camshaft Position (CMP) Sensor, Intake Manifold Runner Position Sensor 2

TrackWireFromToNotes
259li/br 0.35 mm²J624 T60a/44G163 2/Sguess

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.