G200 · Transverse Acceleration Sensor
- Name
- Transverse Acceleration Sensor
- Type
- sensor
- Models
- B7 only
- Diagrams
- 2
Location
Components integrated in one housingmanual text Manual pages 1177
Other location statements (2)
- Wired into the interior wiring harnessinferred from wiring
- Its wires run through T17b (Connector station - left A-pillar)inferred from wiring
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Ground & CAN bus
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
2 | br 0.35 mm² | Ground (terminal 31) at 33 (Behind instrument panel, right)stated | B7 only | 392 630 | |
3 | or/sw 0.35 mm²ro | not stated | J104/37 | B7 only | 392 |
3 | bl 0.35 mm²or/swrows/br | not stated | J104/37 | B7 only | 630 |
5 | sw/br 0.35 mm² | Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived | E132/4, F47/3, J104/32, S7/7a | B7 only | 392 630 |
Diagrams
- 52 · Anti-Lock Brake System (ABS) with Electronic Differential Lock (EDL), Anti-Slip Regulation (ASR), Electronic Brake Pressure B7 · From November 2004
- 104 · Anti-Lock Brake System (ABS) with Electronic Differential Lock (EDL), Anti-Slip Regulation (ASR), Electronic Brake Pressure B7 · From 2006 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.