Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

S3 · Fuse in fuse holder/relay panel

Name
Fuse in fuse holder/relay panel
Type
fuse
Models
B6 and B7
Diagrams
7

Location

Fuse panel at the left end of the instrument panel, fuse No. 3manual text Manual pages 1113, 1117

Other location statements (1)
  • In fuse holder/relay panelsheet legend

Area: Relay carriers and fuse panel (dash, driver's side)

  • 5 A, terminal 75x; feeds Z20 Left Washer Nozzle Heater, Z21 Right Washer Nozzle Heater

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Switches

PinWireFunctionConnects toModelsSheets
3
ge/sw 1.0 mm²
Load-reduction positive (terminal 75, off while cranking)stated
D/2/75, J527/12, J519/17, J519/7
via A33
B6 and B721 47 190 216 +3
3ano colour
Fused supply from S3 (5 A, terminal 75x)derived
Z20/1, Z21/1B6 only21 47 854
3a
gr/gn 0.5 mm²
Fused supply from S3 (5 A, terminal 75x)derived
Z20/1, Z21/1B6 and B7190 216 454 673

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.