Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

S242 · Fuse in fuse holder

Name
Fuse in fuse holder
Type
fuse
Models
B6 and B7
Diagrams
4

Location

Fuse panel at the left end of the instrument panel, fuse No. 42manual text Manual pages 1116, 1120

Other location statements (2)
  • In fuse holdersheet legend
  • Its wires run through T17b (Connector station - left A-pillar)inferred from wiring

Area: Relay carriers and fuse panel (dash, driver's side)

  • 25 A, terminal 30; feeds J104 ABS Control Module

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
42a
ro/li 2.5 mm²
Fused supply from S242 (25 A, terminal 30) to J104 ABS Control Modulederived
J104/6, J104/25B6 and B7159 389 627 925

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.