Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

E132 · Anti-Slip Control Switch

Name
Anti-Slip Control Switch
Type
switch
Models
B6 and B7
Diagrams
4

Location

On the center consolemanual text Manual pages 1175

Other location statements (3)
  • Centre console switch rowinferred from name
  • Wired into the instrument panel wiring harnessinferred from wiring
  • Its wires run through T17b (Connector station - left A-pillar)inferred from wiring

Area: Centre console

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Ground

PinWireFunctionConnects toModelsSheets
1
gr/bl 0.22 mm²
Dimmed switch illumination (terminal 58s)stated
J285/17
via A175
B6 and B7163 393 631 929
3
br 0.22 mm²
Ground (terminal 31) at 33 (Behind instrument panel, right)stated
via 238
B6 and B7163 393 631 929
4
sw/br 0.35 mm²
Ignition-switched positive, fused (terminal 15a), fused by S7 (10 A, terminal 15)stated
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
S7/7a, F/3, J104/23, F47/3, G200/5, J104/32
via A20, A99
B6 and B7163 393 631 929
6
sw/gn 0.35 mm²
not statedJ104/27, J104/4B6 and B7163 393 631 929

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.