Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

S7 · Fuse in fuse holder/relay panel

Name
Fuse in fuse holder/relay panel
Type
fuse
Models
B6 and B7
Diagrams
13

Location

Fuse panel at the left end of the instrument panel, fuse No. 7manual text Manual pages 1113, 1117

Other location statements (2)
  • In fuse holder/relay panelsheet legend
  • Wired into the instrument panel wiring harnessinferred from wiring

Area: Relay carriers and fuse panel (dash, driver's side)

  • 10 A, terminal 15; feeds F36 Clutch Pedal Switch, F47 Brake Pedal Switch, J104 ABS Control Module

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Switches & Sensors

PinWireFunctionConnects toModelsSheets
5
sw 4.0 mm²
Ignition-switched positive (terminal 15)stated
D/6/15, J527/13
via A2
B6 and B7159 389 627 925
12
ro 6.0 mm²
Battery positive, permanent (terminal 30)derived
D/3/30, D/7/30, S123/1
via A32, A57
B6 and B7159 389 627 925
7a
sw/br 1.5 mm²
Ignition-switched positive, fused (terminal 15a), fused by S7 (10 A, terminal 15)stated
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F/3, F36/3, E132/4, F47/3, J104/23, G200/5, J104/32
via A20, A99
B6 and B747 99 119 135 +9
7ano colour
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
E132/4, F47/3, G200/5, J104/32
via A20, A99
B7 only627

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.