Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G202 · Sender for Rotation Rate

Name
Sender for Rotation Rate
Type
sensor
Models
B6 and B7
Diagrams
3

Location

Components integrated in one housingmanual text Manual pages 1177

Other location statements (1)
  • Its wires run through T17b (Connector station - left A-pillar)inferred from wiring

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
1
ws/sw 0.35 mm²
not statedJ104/39B6 only162 928
2
ws/li 0.35 mm²
not statedJ104/21B6 only162 928
3
ws/gn 0.35 mm²
not statedJ104/9B6 only162 928
4
gn/sw 0.35 mm²
not statedJ104/8B6 only162 928
4
li 0.35 mm²
or/br
not statedJ104/24B7 only392
5
ws/ge 0.35 mm²
not statedJ104/10B6 only162 928
6
ws 0.35 mm²
not statedJ104/41B6 only162 928

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.