G201 · Brake pressure sensor 1
- Name
- Brake pressure sensor 1
- Type
- sensor
- Models
- B6 only
- Diagrams
- 2
Location
Bolted to the hydraulic unitmanual text Manual pages 1175
Area: Engine compartment
Articles
Pins
One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.
Pins printed without a connector code likely Module links
| Pin | Wire | Function | Connects to | Models | Sheets |
|---|---|---|---|---|---|
1 | ge/sw 0.5 mm² | not stated | J104/25 | B6 only | 162 928 |
2 | ge/gn 0.5 mm² | not stated | J104/26 | B6 only | 162 928 |
3 | ro/ws 0.5 mm² | not stated | J104/42 | B6 only | 162 928 |
Diagrams
- 14 · ABS, with ESP (4.2 l - Injection Engine) B6 · From 2003 m. y.
- 309 · ABS, with ESP B6 · From 2002 m. y.
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.