Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

F245 · Adjusting element for central locking (safe), left rear door

Name
Adjusting element for central locking (safe), left rear door
Type
switch
Models
B6 and B7
Diagrams
5

Location

In the left rear doorinferred from name

Other location statements (2)
  • Its wires run through T20b (Door B-pillar, left)inferred from wiring
  • Shown in the manual's location figures: Door Locksmanual figure p. 1324

Area: Rear doors

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links

PinWireFunctionConnects toModelsSheets
5
ro/gr 0.35 mm²
not statedJ393/12B7 only482 692
5
li/ge 0.35 mm²
not statedJ388/2B7 only706
6
br 0.35 mm²
Ground (terminal 31)derived
J388/9B7 only706
KL.31
br 0.35 mm²
Ground (terminal 31)derived
J388/9B6 and B782 324 496 1007
safe
ro/gr 0.22 mm²
not statedJ393/12B6 only69 310 994
safe
li/ge 0.35 mm²
not statedJ388/2B6 and B782 324 496 1007

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.