T10g · Connector
Descriptions
| Description | Location | Diagrams |
|---|---|---|
| 10-Pin Connector, black, on door control module, rear, left On J388 Door control module, rear, left | On door control module, rear, leftsheet legend | 6, 35, 67, 110, 111, 318 |
Pin face
Pin positions schematic: check the numbers moulded on the housing
10 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: black sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.
Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.
Tap a pin for what it does and where its wire goes.
T10g pin 1
- Part
J388Door control module, rear, left- Colour
br2.5 mm²- Function
- Ground (terminal 31) at 77 (On left lower B-pillar)stated
- Far ends
- none foundvia
77 - Wire
- Ground (terminal 31) at 77 (On left lower B-pillar)
Ground (terminal 31) at 77 (On left lower B-pillar) - Diagrams
- 6, 35, 67, 110, 318
T10g pin 2
- Part
J388Door control module, rear, left- Colour
ro/ge0.5 mm²- Function
- Fused supply from S223 (15 A)derived
- Far ends
J389/2,S223/23a- Wire
- Fused supply from S223 (15 A)
Fused supply from S223 (15 A) - Diagrams
- 6, 35, 67, 110, 318
T10g pin 3
T10g pin 4
T10g pin 5
T10g pin 6
- Part
J388Door control module, rear, left- Colour
ro/bl2.5 mm²ro/sw- Function
- not stated
- Far ends
J389/6,S280/2- Wire
- Wire between J388 and J389 (+3)
Wire between J388 and J389 (+3) - Diagrams
- 6, 35, 67, 110, 318
T10g pin 7
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T10g pin 8
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T10g pin 9
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
T10g pin 10
No wire on this position in the wiring data. The extracted sheets draw only what each circuit uses, so the position may still be used in the car: check before relying on it.
Pins drawn on this connector code
Pins of components that the manual prints as T10g/n. Because codes are reused, check the diagram column against the description above.
| Part | Pin | Wire | Function | Diagrams |
|---|---|---|---|---|
J388 | 1 | br | Ground (terminal 31) at 77 (On left lower B-pillar) | 6, 35, 67, 110, 318 |
J388 | 2 | ro/ge | Fused supply from S223 (15 A) | 6, 35, 67, 110, 318 |
J388 | 3 | ro/gr | Comfort | 6, 35, 67, 110, 318 |
J388 | 4 | or/gn | Comfort CAN High | 6, 35, 67, 110, 111, 318 |
J388 | 5 | or/br | Comfort CAN Low | 6, 35, 67, 110, 111, 318 |
J388 | 6 | ro/bl | Shared line: J388, J389, S280 | 6, 35, 67, 110, 318 |