T10e · Connector
Descriptions
| Description | Location | Diagrams |
|---|---|---|
| 10-Pin Connector, black, on door control module, driver's door On J386 Door control module, driver side | On door control module, driver's doorsheet legend | 6, 20, 21, 29, 31, 32, 35, 60, 67, 98, 106, 110, 111, 310, 315, 318, 333 |
Pin face
Pin positions schematic: check the numbers moulded on the housing
10 positions (sheet legend), pin 1 top left, then in number order. The manual does not give the housing shape, its keying or how the pins sit in rows. Housing colour: black sheet legend. A dashed cell is a position with no wire in the extracted sheets: that does not mean it is empty in the car. Tap a pin for its function, far ends and wire.
Dimmed: pins drawn only in diagrams that do not apply to the car set in “My car”.
Tap a pin for what it does and where its wire goes.
T10e pin 1
- Part
J386Door control module, driver side- Colour
br2.5 mm²- Function
- Ground (terminal 31) at 44 (On left lower A-pillar)stated
- Far ends
- none foundvia
44 - Wire
- Ground (terminal 31) at 44 (On left lower A-pillar)
Ground (terminal 31) at 44 (On left lower A-pillar) - Diagrams
- 6, 35, 67, 110, 318
T10e pin 2
- Part
J386Door control module, driver side- Colour
ro/ge0.5 mm²- Function
- Fused supply from S22 (15 A, terminal 30)derived
- Far ends
J387/2,S22/22a- Wire
- Fused supply from S22 (15 A, terminal 30)
Fused supply from S22 (15 A, terminal 30) - Diagrams
- 6, 35, 67, 110, 318
T10e pin 3
T10e pin 4
T10e pin 5
T10e pin 6
- Part
J386Door control module, driver side- Colour
ro/sw2.5 mm²- Function
- not stated
- Far ends
J387/6,S37/2- Wire
- Wire between J386 and J387 (+3)
Wire between J386 and J387 (+3) - Diagrams
- 6, 35, 67, 110, 318
T10e pin 7
- Part
J519Vehicle Electrical System Control Module- Colour
li/ws0.35 mm²- Function
- Automatic Day/Night Interior Mirrorstated
- Far ends
G399/4,J387/7viaA187- Wire
- Automatic Day/Night Interior Mirror
Automatic Day/Night Interior Mirror - Diagrams
- 29, 60
T10e pin 8
T10e pin 9
T10e pin 10
- Part
J386Door control module, driver side- Colour
gn/ro0.35 mm²gn/sw- Function
- not stated
- Far ends
J136/8- Wire
- Wire between J136 and J386 (+2)
Wire between J136 and J386 (+2) - Diagrams
- 6, 35, 67, 318
- Part
J386Door control module, driver side- Colour
gn/sw0.35 mm²- Function
- not stated
- Far ends
J136/8- Wire
- Wire between J136 and J386 (+2)
Wire between J136 and J386 (+2) - Diagrams
- 31, 98, 106, 110, 315
Pins drawn on this connector code
Pins of components that the manual prints as T10e/n. Because codes are reused, check the diagram column against the description above.
| Part | Pin | Wire | Function | Diagrams |
|---|---|---|---|---|
J386 | 1 | br | Ground (terminal 31) at 44 (On left lower A-pillar) | 6, 35, 67, 110, 318 |
J386 | 2 | ro/ge | Fused supply from S22 (15 A, terminal 30) | 6, 35, 67, 110, 318 |
J386 | 3 | ro/gr | Comfort | 6, 35, 67, 318 |
J386 | 3 | or | Comfort | 110 |
J386 | 4 | or/gn | Comfort CAN High | 6, 31, 35, 67, 98, 106… |
J386 | 5 | or/br | Comfort CAN Low | 6, 31, 35, 67, 98, 106… |
J386 | 6 | ro/sw | Shared line: J386, J387, S37 | 6, 35, 67, 110, 318 |
J386 | 7 | li/ws | Automatic Day/Night Interior Mirror | 6, 20, 21, 35, 67, 110… |
J386 | 8 | li | Automatic Day/Night Interior Mirror | 6, 20, 21, 29, 35, 60… |
J386 | 9 | gn/li | E284 Garage Door Opener Control Head — line to J386 Door control module, driver side T10e/9 | 6, 32, 35, 67, 110, 318… |
J386 | 10 | gn/ro | J136 Memory Seat Control Module ↔ J386 T10e/10 | 6, 35, 67, 318 |
J386 | 10 | gn/sw | J136 Memory Seat Control Module ↔ J386 T10e/10 | 31, 98, 106, 110, 315 |
J519 | 7 | li/ws | Automatic Day/Night Interior Mirror | 29, 60 |