Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G399 · Light Recognition Sensor

Name
Light Recognition Sensor
Type
sensor
Models
B6 and B7
Diagrams
3

Location

Wired into the instrument panel wiring harnessinferred from wiring · 5 of 7 named splices on its wires

Other location statements (1)
  • Its wires run through T17f (Connector station - left A-pillar)inferred from wiring

Area: Instrument panel

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Lighting

PinWireFunctionConnects toModelsSheets
1
sw/bl 0.35 mm²
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)derived
Ignition-switched positive, fused (terminal 15a), fuse 231, fused by S231 (15 A, terminal 15)stated
E1/1/XZ, E491/4/58d, E491/8/58S, J519/18, S231/31a
via A19, A70
B6 and B7229 260 435
2
br 0.35 mm²
Ground (terminal 31) at 44 (On left lower A-pillar)stated
via 347
B6 and B7260 435
3
bl/ro 0.22 mm²
Reversing lights (RF)stated
Reverse lampstated
J519/30, J519/2
via A87
B6 and B7229 260 435
4
li/ws 0.22 mm²
Automatic Day/Night Interior Mirrorstated
J387/7, J519/7
via A187
B6 and B7260 435
5
li 0.22 mm²
Automatic Day/Night Interior Mirrorstated
J386/8, J387/8
via A188
B6 and B7260 435
6
br/sw 0.35 mm²
not statedW/1B6 and B7229 260 435

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.