Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

S282 · Engine Electronics Fuse

Name
Engine Electronics Fuse
Type
fuse
Models
B6 and B7
Diagrams
10

Location

Relay carrier E-Box, engine codes BPG, BWT from 2006 MY, position A (blue socket) — In electronics box (E-box), plenum chambermanual text Manual pages 1108 · engine codes BPG, BWT from 2006 MY

Other location statements (4)
  • Relay carrier E-Box, engine codes BHF from 2006 MY, position G (red socket) — In electronics box (E-box), plenum chambermanual text p. 1109
  • Relay carrier E-Box, engine codes BKH from 2006 MY, position B (brown socket) — In electronics box (E-box), plenum chambermanual text p. 1110
  • Relay carrier E-Box, engine codes BNS from 2006 MY, position B (brown socket) — In electronics box (E-box), plenum chambermanual text p. 1111
  • Wired into the engine compartment wiring harnessinferred from wiring

Area: Electronics box (plenum chamber)

  • 15 A — Engine Electronics Fuse (engine codes BPG, BWT from 2006 MY)
  • 15 A — Engine Electronics Fuse (engine codes BHF from 2006 MY)
  • 15 A — Engine Electronics Fuse (engine codes BKH from 2006 MY)
  • 15 A — Engine Electronics Fuse (engine codes BNS from 2006 MY)

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Power & Motors/actuators

PinWireFunctionConnects toModelsSheets
1
ro/gr 1.5 mm²
J271 Motronic Engine Control Module Power Supply Relay: relay normally-closed output (87a) to S282 Engine Electronics Fusederived
Battery positive, permanent (terminal 30)derived
J271/5/87a, J271/2/87, J757/3/T, S102/1, S131/1, S228/28, S286/1, S4/4
via A151, D101
B6 and B7100 120 525 867 +1
1
gn/bl 1.0 mm²
J271 Motronic Engine Control Module Power Supply Relay: relay normally-closed output (87a) to S282 Engine Electronics Fusederived
J271/5/87aB6 only136
1
gn 1.5 mm²
Relay output (terminal 87)derived
J17/2, S116/1, S228/228
via D103
B7 only551
1
ro/br 1.5 mm²
J757 Engine Component Power Supply Relay: relay switched output (87)derived
J757/2/87, S73/1
via D103
B7 only571
1
sw/ro 1.5 mm²
J757 Engine Component Power Supply Relay: relay switched output (87)derived
J757/2/87, N112/1, S73/1
via D103
B7 only605 802
2
or 1.5 mm²
ro/gn
Relay output, normally closed (terminal 87a)stated
J151/1, J151/3, N205/2, N208/2
via E7
B6 only100
2
gn/bl 0.5 mm²
not statedF265/1, N205/1B6 only120 888
2
ro/gn 1.5 mm²
Relay output, normally closed (terminal 87a)stated
Engine Electronicsstated
J151/1, J151/3, J299/6/86, N144/1, N145/1, N290/1, N316/1, N321/1, N335/1, N402/1, N80/1, V144/3/+ and 5 more
via E7, D172
B6 and B7136 605 802 867
2
ro/bl 1.0 mm²
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F36/3, F47/3, N205/1
via A99, D172
B7 only525
2
gn/ge 1.5 mm²
Engine Electronicsstated
N156/1, N80/1, G70/2, J299/4/86, N112/1, N144/1, N145/1, N220/1, V144/1, N290/1, N316/1, V144/3 and 1 more
via A100, D172
B7 only551 571

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.