Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

N156 · Intake Manifold Change-Over Valve

Name
Intake Manifold Change-Over Valve
Type
solenoid / valve / coil
Models
B6 and B7
Diagrams
5

Location

Shown in the manual's location figures: Engine; 3.0L AVK and BGN; 4.2L BHFmanual figure Manual pages 1192, 1216, 1222, 1236, 1239

Area: Engine

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Module links

PinWireFunctionConnects toModelsSheets
1
gn/ge 0.5 mm²
Fused supply, after fuse 234, fused by S232 (20 A)stated
Engine Electronicsstated
N80/1, G70/2, J299/4/86, N112/1, V144/3, S232/234a, N144/1, N145/1, S282/2, N220/2, S234/234a, N220/1 and 4 more
via D22, A100, A152, D172
B6 and B7102 138 551 572 +1
2
ge/ws 0.35 mm²
not statedJ220/48, J623/52B6 and B7102 572 869
2
gn/sw 0.35 mm²
not statedJ220/121, J623/121B6 and B7138 551

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.