Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

S286 · Automatic Transmission After-Run Fuse

Name
Automatic Transmission After-Run Fuse
Type
fuse
Models
B6 and B7
Diagrams
10

Location

Relay carrier E-Box, engine codes BPG, BWT from 2006 MY, position G (lilac socket) — In electronics box (E-box), plenum chambermanual text Manual pages 1108 · engine codes BPG, BWT from 2006 MY

Other location statements (3)
  • Relay carrier E-Box, engine codes BHF from 2006 MY, position C (grey socket) — In electronics box (E-box), plenum chambermanual text p. 1109
  • Relay carrier E-Box, engine codes BKH from 2006 MY, position G (lilac socket) — In electronics box (E-box), plenum chambermanual text p. 1110
  • Wired into the engine compartment wiring harnessinferred from wiring

Area: Electronics box (plenum chamber)

  • 15 A — Automatic Transmission After-Run Fuse (engine codes BPG, BWT from 2006 MY)
  • 15 A — Automatic Transmission After-Run Fuse (engine codes BHF from 2006 MY)
  • 15 A — Automatic Transmission After-Run Fuse (engine codes BKH from 2006 MY)

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Motors/actuators & Module links

PinWireFunctionConnects toModelsSheets
1
ro 1.0 mm²
Battery positive, permanent (terminal 30)derived
Battery positive, permanent (terminal 30)stated
D/3/30, D/7/30, J271/1/30, B/30, C/B+/30, S130/1, S88/+, J623/92, J757/1/30, S14/12, S88, J271/1/T and 6 more
via A32, A57, A98, D50, F33
B6 and B791 136 382 518 +3
1
ro/gr 1.0 mm²
Battery positive, permanent (terminal 30)derived
Relay output (terminal 87)stated
J271/2/87, J317/1, J317/2/87, J271/8/87, S102/1, S131/1, S4/4, J757/3/T, S228/28, S282/1, J757/4/85, S228/228 and 2 more
via A151, D101, D173
B6 and B7242 518 543 568 +1
2
br/ro 1.0 mm²
Feed to fuse S286 (15 A, Automatic Transmission After-Run Fuse)derived
J217/14B6 and B791 382 537
2
ro/gn 1.5 mm²
Feed to fuse S286 (15 A, Automatic Transmission After-Run Fuse)derived
J217/9B6 only242
2
ro/gr 0.5 mm²
sw/gn
Feed to fuse S286 (15 A, Automatic Transmission After-Run Fuse)derived
J217/9B6 and B7242 543 1015
2
sw/gn 1.0 mm²
Feed to fuse S286 (15 A, Automatic Transmission After-Run Fuse)derived
J217/9, J217/14B7 only537 543

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.