Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

N205 · Valve -1- for camshaft adjustment

Name
Valve -1- for camshaft adjustment
Type
solenoid / valve / coil
Models
B6 and B7
Diagrams
10

Location

Wired into the engine compartment wiring harnessinferred from wiring · 5 of 6 named splices on its wires

Other location statements (1)

Area: Engine compartment

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Motors/actuators

PinWireFunctionConnects toModelsSheets
1
br/gr 0.5 mm²
not statedJ220/115B6 only103 870
1
gn/bl 0.5 mm²
not statedF265/1, S282/2B6 only124 892
1
ro/gn 0.5 mm²
Relay output, normally closed (terminal 87a)stated
J151/1, J151/3, N208/1, S282/2
via E7
B6 only139
1
ro/bl 1.0 mm²
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F36/3, F47/3, S282/2, J496/1/86, J496/3/30, N144/1, N145/1, N208/1, N318/1, N319/1, S344/2
via A99, D107, D172
B7 only525 577
1
ro/sw 0.5 mm²
not statedJ151/1, J151/3, N208/1, S344/2
via D106
B7 only549
1
ge/bl 1.0 mm²
not statedJ623/20B7 only611
1
or 1.0 mm²
not statedJ623/20B7 only808
2
ro/gn 0.5 mm²
Relay output, normally closed (terminal 87a)stated
J151/1, J151/3, N208/2, S282/2
via E7
B6 only103 870
2
ge/gr 0.5 mm²
not statedJ220/115B6 only124 892
2
br/gr 0.5 mm²
not statedJ220/115, J623/20, J623/115, J623/51B6 and B7139 525 549 577
2
ro/gr 0.5 mm²
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F36/3, F47/3, G70/2/--, J151/1/86, J151/3/30, N208/2, N318/2, N319/2, S344/2
via A99, D107
B7 only611 808
2/S
gn/gr 0.35 mm²
J220 Motronic Engine Control Module: relay coil (86) to N205 Valve -1- for camshaft adjustmentderived
J220/86B6 only124 892

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.