Engine Electronics
Net n3eb33714 · one diagram
- Function
- Engine ElectronicsstatedBasis: splice D172 is named so in the legend
- Also named
- Relay output (terminal 87)
- Wire
gn/gews- Models
- B7 only · 4.2 S4
- Drawn in
- 1 diagram, 21 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 guessed component
What is on this wire
Supply (1)
Fuses, the battery, alternator, ignition switch, and pins marked with a supply terminal (30, 15, 75, X, 50, 87).
S282pin2guessEngine Electronics Fuse
Parts (9)
G70pin2Mass Air Flow (MAF) SensorJ299pin4/86Secondary Air Injection (AIR) Pump RelayN80pin1Evaporative Emission (EVAP) Canister Purge Regulator ValveN112pin1Secondary Air Injection (AIR) Solenoid ValveN144pin1Left Electro-Hydraulic Engine Mount Solenoid ValveN145pin1Right Electro-Hydraulic Engine Mount Solenoid ValveN156pin1Intake Manifold Change-Over ValveN220pin1Valve for exhaust flapV144pin1Leak detection pump (LDP)
Splices (2)
Inline connectors (5)
T4apin14-Pin Connector, green, connector station Heated Oxygen Sensor (HO2S) (firewall)T4cpin14-Pin Connector, brown, connector station Heated Oxygen Sensor (HO2S) (firewall)T6pin36-Pin Connector, black, connector station Heated Oxygen Sensor (HO2S) (firewall)T6apin36-Pin Connector, black, connector station Heated Oxygen Sensor (HO2S) (firewall)T17dpin117-Pin Connector, red, connector station E-box, plenum chamber
Where these parts are
| Part | Location |
|---|---|
G70 | Wired into the engine compartment wiring harnessinferred from wiring |
J299 | Relay carrier E-Box, engine codes BHF from 2006 MY, position 3 (black socket) — In electronics box (E-box), plenum chambermanual text p. 1109 |
N80 | Wired into the engine compartment wiring harnessinferred from wiring |
N112 | Below intake manifoldmanual text p. 1194 |
N144 | On the left engine mountmanual text p. 1203 p. 1227 |
N145 | On the right engine mountmanual text p. 1224 |
N156 | Shown in the manual's location figures: Engine; 3.0L AVK and BGN; 4.2L BHFmanual figure p. 1192 p. 1216 p. 1222 |
N220 | not stated |
S282 | Relay carrier E-Box, engine codes BPG, BWT from 2006 MY, position A (blue socket) — In electronics box (E-box), plenum chambermanual text p. 1108 |
V144 | In the left rear wheel housing behind wheel housing linermanual text p. 1200 p. 1224 p. 1235 |
A100 | Splice inside the instrument panel wiring harnesssheet legend |
D172 | Splice inside the engine compartment wiring harnesssheet legend |
T4a | Connector station Heated Oxygen Sensor (HO2S) (firewall)sheet legend |
T4c | Connector station Heated Oxygen Sensor (HO2S) (firewall)sheet legend |
T6 | Connector station Heated Oxygen Sensor (HO2S) (firewall)sheet legend |
T6a | Connector station Heated Oxygen Sensor (HO2S) (firewall)sheet legend |
T17d | In electronics box, plenum chambermanual text p. 1101 p. 1102 |
Drawing
Wires are gn/ge (green/yellow) unless a colour is written on them. 21 parts and points, 20 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet. "→ track" is a reference box: the wire continues on that track, at the stretch its page link points to.
- guess: the component label is not right at the symbol; the part was assigned by position.
89 · 4.2L - Injection Engine (253 kW - Motronic - 8 Cylinder) engine codes BBK, BHF B7 · 21 stretches
Page 551manual · Engine Control Module (ECM), Secondary Air Injection (AIR) Solenoid Valve, Intake Manifold Change-Over Valve, Cylinder Fuel Injectors, Electro-Hydraulic Engine Mount
| Track | Wire | From | To | Notes |
|---|---|---|---|---|
| 62 | gn/ge 1.5 mm² | S282 2guess | splice D172 | |
| 62 | gn/ge 0.5 mm² | splice D172 | → track 151 (p. 557) | |
| 64 | gn/ge 0.5 mm² | N156 1 | splice D172 | |
| 64 | gn/ge 0.5 mm² | splice D172 | → track 118 (p. 555) | |
| 66 | gn/ge 0.5 mm² | N144 1 | splice D172 | |
| 66 | gn/ge 0.5 mm² | splice D172 | → track 125 (p. 555) | |
| 68 | gn/ge 0.5 mm² | N145 1 | splice D172 | |
| 68 | gn/ge 0.5 mm² | splice D172 | → track 132 (p. 556) | |
| 70 | gn/ge 0.5 mm² | N112 1 | splice D172 | |
| 70 | gn/ge 0.5 mm² | splice D172 | → track 139 (p. 556) |
Page 552manual · Engine Control Module (ECM), Mass Air Flow (MAF) Sensor, Evaporative Emission (EVAP) Canister Purge Regulator Valve, Leak Detection Pump (LDP)
| Track | Wire | From | To | Notes |
|---|---|---|---|---|
| 73 | gn/ge 0.5 mm² | G70 2 | splice D172 | |
| 76 | gn/ge 0.5 mm² | N80 1 | splice D172 | |
| 78 | gn/ge 0.5 mm² | → track 148 (p. 557) | splice A100 | |
| 78 | gn/ge 1.0 mm² | splice A100 | splice D172 | via T17d/1 |
| 80 | gn/ge 0.5 mm² | splice A100 | V144 1 |
Page 555manual · Engine Control Module (ECM), Heated Oxygen Sensors
| Track | Wire | From | To | Notes |
|---|---|---|---|---|
| 118 | gn/ge → ws 0.5 mm² | → track 64 (p. 551) | joint | via T4a/1 |
| 125 | gn/ge → ws 0.5 / 1.0 mm² | → track 66 (p. 551) | joint | via T6/3 |
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.