Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

S102 · Engine Control Module (ECM) Fuse

Name
Engine Control Module (ECM) Fuse
Type
fuse
Models
B7 only
Diagrams
5

Location

Relay carrier E-Box, engine codes BPG, BWT from 2006 MY, position C (grey socket) — In electronics box (E-box), plenum chambermanual text Manual pages 1108 · engine codes BPG, BWT from 2006 MY

Other location statements (4)
  • Relay carrier E-Box, engine codes BHF from 2006 MY, position D (yellow socket) — In electronics box (E-box), plenum chambermanual text p. 1109
  • Relay carrier E-Box, engine codes BKH from 2006 MY, position C (grey socket) — In electronics box (E-box), plenum chambermanual text p. 1110
  • Relay carrier E-Box, engine codes BNS from 2006 MY, position C (grey socket) — In electronics box (E-box), plenum chambermanual text p. 1111
  • Wired into the engine compartment wiring harnessinferred from wiring

Area: Electronics box (plenum chamber)

  • 15 A — Engine Control Module (ECM) Fuse (engine codes BPG, BWT from 2006 MY)
  • 20 A — Engine Control Module (ECM) Fuse (engine codes BHF from 2006 MY)
  • 15 A — Engine Control Module (ECM) Fuse (engine codes BKH from 2006 MY)
  • 15 A — Engine Control Module (ECM) Fuse (engine codes BNS from 2006 MY)

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Switches & Module links

PinWireFunctionConnects toModelsSheets
1
ro/gr 1.5 mm²
Battery positive, permanent (terminal 30)derived
J271/2/87, S4/4, S131/1, S286/1, S344/1, J757/3/T, S228/28, S282/1, D/3/30, D/7/30, J757/4/85, S228/228
via A32, A151, D101
B7 only518 560 570
1
ro/br 2.5 mm²
Relay output (terminal 87)stated
J271/2/87, J757/3/85, S131/1, S228/228, S4/4, S344/1
via A151, D101
B7 only615 812
2
gr/bl 1.5 mm²
Feed to fuse S102 (15 A, Engine Control Module (ECM) Fuse)derived
J623/3, J623/5, J623/6
via D102
B7 only518
2
ro/gn 2.5 mm²
Feed to fuse S102 (15 A, Engine Control Module (ECM) Fuse)derived
J623/3, N127/1, N291/1, N292/1, N323/1, N324/1, N325/1, N326/1, N70/1, J623/5, J623/6
via D102
B7 only560 570
2
ro/bl 1.5 mm²
Engine control module supply from fuse S102 (15 A) to J623 and J624stated
J623/3, J623/5, J623/6, J624/3, J624/5, J624/6
via D102, D113
B7 only615 812

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.