Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

J496 · Auxiliary Engine Coolant (EC) Pump Relay

Name
Auxiliary Engine Coolant (EC) Pump Relay
Type
control module / relay
Models
B7 only
Diagrams
1

Location

Relay carrier E-Box, engine codes BKH from 2006 MY, position 1.1 (blue socket) — In electronics box (E-box), plenum chambermanual text Manual pages 1110 · engine codes BKH from 2006 MY

Other location statements (1)
  • Wired into the engine compartment wiring harnessinferred from wiring

Area: Electronics box (plenum chamber)

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Motors/actuators & Module links

PinWireFunctionConnects toModelsSheets
1/86
ro/bl 0.5 mm²
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F36/3, F47/3, J496/3/30, N144/1, N145/1, N205/1, N208/1, N318/1, N319/1, S344/2
via A99, D107
B7 only577
2/85
gr/bl 0.35 mm²
J496 Auxiliary Engine Coolant Pump Relay: relay coil (85) to J623 Engine Control Modulederived
J623/70B7 only577
3/30
ro/bl 1.0 mm²
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F36/3, F47/3, J496/1/86, N144/1, N145/1, N205/1, N208/1, N318/1, N319/1, S344/2
via A99, D107
B7 only577
5/87
ro/gn 1.0 mm²
J496 Auxiliary Engine Coolant Pump Relay: relay switched output (87) to V51 After-Run Coolant Pumpderived
V51/1B7 only577

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.