Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

N318 · Camshaft Adjustment Valve 1 (exhaust)

Name
Camshaft Adjustment Valve 1 (exhaust)
Type
solenoid / valve / coil
Models
B6 and B7
Diagrams
5

Location

Wired into the engine compartment wiring harnessinferred from wiring · 3 of 3 named splices on its wires

Other location statements (1)

Area: Engine compartment

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Motors/actuators

PinWireFunctionConnects toModelsSheets
1
ro/bl 1.0 mm²
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F36/3, F47/3, J496/1/86, J496/3/30, N144/1, N145/1, N205/1, N208/1, N319/1, S344/2
via A99, D107
B7 only577
1
ge/gn 0.5 mm²
not statedJ623/21B7 only611 808
2
br/gr 0.5 mm²
not statedJ623/27B7 only577
2
ro/gr 0.5 mm²
Relay output (terminal 87), fused by S7 (10 A, terminal 15)derived
F36/3, F47/3, G70/2/--, J151/1/86, J151/3/30, N205/2, N208/2, N319/2, S344/2
via A99, D107
B7 only611 808
3
br/gr 0.35 mm²
not statedJ220/22B6 only103 870

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.