Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

F1 · Oil Pressure Switch

Name
Oil Pressure Switch
Type
switch
Models
B6 and B7
Diagrams
17

Location

Its wires run through T10 (Connector station on E-Box)inferred from wiring · 10 wires

Other location statements (1)

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Module links

PinWireFunctionConnects toModelsSheets
1
br 0.5 mm²
Ground (terminal 31) at 12 (In engine compartment, left)stated
C24, G266/2/31, J623/1, J623/2, J623/4, N292/2, N323/2, N324/2, V274/1, V51/2
via 12, 83, 121
B7 only584 676
2
ws/gr 0.5 mm²
not statedJ285/16, F1B7 only584 676

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.