Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G266 · Oil Level Thermal Sensor

Name
Oil Level Thermal Sensor
Type
sensor
Models
B6 and B7
Diagrams
16

Location

At the bottom of the oil panmanual text Manual pages 1194, 1203, 1213, 1235 · 1.8L T AMB, 2.0L BPG and BWT, 3.0L AVK and BGN, 4.2L BHF

Other location statements (3)
  • At the bottom of lower oil panmanual text p. 1224
  • Wired into the right front wiring harnessinferred from wiring
  • Its wires run through T10a (Connector station E-box, plenum chamber)inferred from wiring

Area: Engine

Articles

Part numbers

From the parts catalogue, tied to G266 by tools/link_parts_wiring.py. The badge says on what grounds: name the names agree and the row is filed where the part sits; possible only a candidate, not a statement. Check the number against your chassis number before ordering. The catalogue on this site is incomplete: of the B6 catalogue only main groups 1 Engine (101 illustrations) and 4 Front axle, steering (3 illustrations) are loaded; nothing of the B7 catalogue is loaded.

Named in the catalogue, number not loaded yet

  • A4 B6 103-010 item 37: “oil level sensor”, see illustration 919-040 possible
    "oil level sensor" against "Oil Level Thermal Sensor": the component name adds "thermal". Illustration 919-040 is not in the loaded part of the catalogue.
  • A4 B6 103-030 item 8: “oil level sensor”, see illustration 919-060 possible
    "oil level sensor" against "Oil Level Thermal Sensor": the component name adds "thermal". Illustration 919-060 is not in the loaded part of the catalogue.

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Power & Module links

PinWireFunctionConnects toModelsSheets
1
sw/ro 1.0 mm²
Ignition-switched positive, fused (terminal 15a), fuse 5, fused by S5 (10 A, terminal 15)derived
Ignition-switched positive, fused (terminal 15a), fuse 5, fused by S5 (10 A, terminal 15)stated
S5/5a
via A74
B6 and B722 48 112 128 +7
1
or 1.0 mm²
sw/ro
Ignition-switched positive, fused (terminal 15a), fuse 5, fused by S5 (10 A, terminal 15)derived
S5/5a
via A74
B6 only896
2
br 0.5 mm²
Ground (terminal 31) at 12 (In engine compartment, left)stated
G70/2, J623/1, J623/2, J623/4, N127/2, N291/2, N292/2, N70/2
via 12, 83, 131
B6 and B722 48 112 128 +8
3
ro/gr 0.35 mm²
not statedJ285/23B6 and B722 48 112 149 +6
3
ro/gn 0.35 mm²
ro/gr
not statedJ285/23B6 only128 896
1/15
sw/ro 1.0 mm²
Ignition-switched positive, fused (terminal 15a), fuse 5, fused by S5 (10 A, terminal 15)stated
S5/5a
via A74
B7 only562 584 622 820
2/31
br 0.5 mm²
Ground (terminal 31) at 12 (In engine compartment, left)stated
Ground (terminal 31) at 18 (On engine block), 12 (In engine compartment, left)stated
V51/2, J623/1, J623/2, J623/4, V274/1, N323/2, N324/2, J624/36, N36/--, V192/1, N325/2, N326/2 and 4 more
via 12, 18, 83, 85, 121, 131
B7 only562 584 622 820
3/S
ro/gr 0.35 mm²
ws/gr
not statedJ285/23B7 only562 584 622 820

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.