Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

E25 · Right Safety Belt Switch

Name
Right Safety Belt Switch
Type
switch
Models
B6 and B7
Diagrams
3

Location

Its wires run through T8c (Connector station - RF seat wiring)inferred from wiring · 4 wires

Other location statements (1)
  • Shown in the manual's location figures: Passive Occupant Detection Systemmanual figure p. 1186

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Ground

PinWireFunctionConnects toModelsSheets
1
gn/ro 0.35 mm²
not statedJ234/57B7 only410 638
1
br 0.35 mm²
Ground (terminal 31)stated
E24/1, G128/1
via 109, 412
B7 only411 639
1
bl 0.35 mm²
br
Ground (terminal 31)stated
via 109
B6 only920
2
br 0.35 mm²
gr
Ground (terminal 31)stated
J706/5
via 109, 412
B7 only410 638
2
ge 0.35 mm²
gn/ro
not statedJ234/72B6 only920
3
gn 0.35 mm²
not statedB6 only920
4
br 0.35 mm²
not statedB6 only920

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.