Ground (terminal 31)
Net ndeaf405e · joined across diagrams
- Function
- Ground (terminal 31)statedBasis: ground connection 412, 109
- Wire
brgror- Models
- B7 only
- Drawn in
- 2 diagrams, 6 stretches
- Checked
- Not checked by hand. Extracted from the manual automatically.
1 join between diagrams
What is on this wire
Parts (2)
Grounds (2)
Inline connectors (2)
Where these parts are
| Part | Location |
|---|---|
E25 | Its wires run through T8c (Connector station - RF seat wiring)inferred from wiring |
J706 | Its wires run through T17k (In passenger's Seat)inferred from wiring |
109 | Splice inside the airbag wiring harnesssheet legend |
412 | Splice inside the seat adjustment wiring harnesssheet legend |
T8c | Under front passenger's seatmanual text p. 1099 |
T17k | In passenger's Seatsheet legend |
Drawing
Wires are br (brown) unless a colour is written on them. 10 parts and points, 10 connections.
A schematic of the connections, drawn by this site from the traced wire: not the layout of the sheets. Red-edged boxes are the supply side. Parts appear once with every pin this wire touches; splices, grounds and inline connectors once per diagram (their codes repeat between diagrams). A wire that continues through a reference box or an unnamed joint is one line. Not shown: what is inside the parts (fuse elements, relay contacts, switches). Dashed lines are uncertain links; dashed red boxes are ends the extraction could not resolve. Tap a line for its stretch below, its colour for the sheet.
Stretch by stretch
Every stretch of this wire as the sheets draw it: one block per diagram, one table per sheet. The track number opens the stretch on the drawn sheet.
54 · Airbags and Safety Belt Tensioners B7 · 3 stretches
Diagram 54 page · joined to other diagrams at J706/5
Page 410manual · Right Safety Belt Switch, Seat Occupied Recognition Control Module, Seat Occupied Recognition Pressure Sensor, Seat Occupied Recognition Safety Belt Force Sensor
| Track | Wire | From | To | Notes |
|---|---|---|---|---|
| 82 | gr → br 0.35 / 0.5 mm² | ground 412 | J706 5 | via marked ****T17k/2 |
| 84 | gr → br 0.35 mm² | E25 2 | ground 412 | marked **** |
| 84 | br 0.5 / 0.35 mm² | ground 412 | ground 109 | via T8c/5 |
105 · Airbags and Safety Belt Tensioners B7 · 3 stretches
Diagram 105 page · joined to other diagrams at J706/5
From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.