Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G128 · Front Passenger's Seat Occupied Sensor

Name
Front Passenger's Seat Occupied Sensor
Type
sensor
Models
B7 only
Diagrams
2

Location

In or under the front passenger's seatinferred from name

Other location statements (2)
  • Its wires run through T8c (Connector station - RF seat wiring)inferred from wiring
  • Shown in the manual's location figures: Seat Belt Tensionersmanual figure p. 1187

Area: Seats

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Switches & Module links

PinWireFunctionConnects toModelsSheets
1
br 0.35 mm²
Ground (terminal 31)stated
E24/1, E25/1
via 109, 412
B7 only411 639
2
gn/bl 0.35 mm²
not statedJ234/6B7 only411 639
2
gn/ro 0.35 mm²
not statedJ234/57B7 only411 639

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.