Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

E24 · Left Seat Belt Switch

Name
Left Seat Belt Switch
Type
switch
Models
B6 and B7
Diagrams
3

Location

Wired into the airbag wiring harnessinferred from wiring · 3 of 4 named splices on its wires

Other location statements (1)
  • Its wires run through T8b (Connector station - LF seat wiring)inferred from wiring

Area: Seats

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Module links & Sensors

PinWireFunctionConnects toModelsSheets
1
br 0.35 mm²
Ground (terminal 31)stated
E25/1, G128/1
via 109, 412
B7 only411 639
1
bl 0.35 mm²
br
Ground (terminal 31)stated
via 109
B6 only920
2
gn/ge 0.35 mm²
not statedJ234/55B7 only411 639
2
ge 0.35 mm²
gn/ge
not statedJ234/71B6 only920
3
br 0.35 mm²
or
Ground (terminal 31) at 77 (On left lower B-pillar)stated
via 277
B6 only920
4
br 0.35 mm²
gr/sw
not statedJ285/30B6 only920

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.