Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G65 · High Pressure Sensor

Name
High Pressure Sensor
Type
sensor
Models
B6 and B7
Diagrams
3

Location

Wired into the instrument panel wiring harnessinferred from wiring · 3 of 3 named splices on its wires

Other location statements (2)
  • Its wires run through T10d (Connector station - left A-pillar)inferred from wiring
  • Shown in the manual's location figures: Components Inside Passenger Compartmentmanual figure p. 1171

Area: Instrument panel

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Ground & Switches

PinWireFunctionConnects toModelsSheets
1
br 0.35 mm²
br/ws
Ground (terminal 31) at 12 (In engine compartment, left)stated
via 12
B6 only294 979
1
br/ws 0.35 mm²
Ground (terminal 31) at 12 (In engine compartment, left)stated
via 12
B7 only422
2
br/bl 0.35 mm²
not statedE87/D/7, J255/D/7B6 and B7294 422 979
3
gr/ro 0.5 mm²
Ignition-switched positive, fused (terminal 15a), fused by S6 (5 A, terminal 15)stated
G238/1, S6/6a
via A38
B6 and B7294 422 979

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.