Skip to content

Search is only available in production builds. Try building and previewing the site to test it out locally.

G238 · Sensor for air quality

Name
Sensor for air quality
Type
sensor
Models
B6 and B7
Diagrams
3

Location

Wired into the instrument panel wiring harnessinferred from wiring · 3 of 6 named splices on its wires

Other location statements (2)
  • Its wires run through T10c (Connector station - left A-pillar)inferred from wiring
  • Shown in the manual's location figures: Components Inside Passenger Compartmentmanual figure p. 1171

Area: Instrument panel

Articles

Pins

One row per pin and wire colour; the pin opens the page of its wire, traced across every sheet. "Connects to" lists the other pins on the same circuit within a diagram; splices and ground points it passes are under "via". The function says how it was worked out: stated by the manual, derived from terminal markings, fuses or the colour code. "Not stated" means the manual only shows what the wire connects.

Pins printed without a connector code likely Sensors & Ground

PinWireFunctionConnects toModelsSheets
1
gr/ro 0.5 mm²
Ignition-switched positive, fused (terminal 15a), fused by S6 (5 A, terminal 15)stated
G65/3, S6/6a
via A38
B6 and B7294 421 979
2
br 0.5 mm²
Ground (terminal 31)stated
via 261
B6 and B7294 421 979
3
br/li 0.35 mm²
not statedE87/C/7, J255/C/7B6 and B7294 421 979

Diagrams

From the factory manual Audi A4 Wiring Diagrams and Component Locations, edition 12.2005, extracted automatically. Check anything important against the PDF sheet.